User manual YAMAHA PSR-47E

[. . . ] This product may also use "household" type batteries. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Mismatches or incorrect installation may result in overheating and battery case rupture. Warning: Do not attempt to disassemble, or incinerate any battery. [. . . ] Determines the octave range for the Main Voice. Determines how much of the Main Voice's signal is sent to the Chorus effect. Determines the volume of the Dual Voice. Determines the octave range for the Dual Voice. Determines how much of the Dual Voice's signal is sent to the Chorus effect. Determines the volume of the Split Voice. Determines the octave range for the Split Voice. Determines how much of the Split Voice's signal is sent to the Chorus effect. Determines the Reverb type, including off (10). Refer to the Reverb Type list on page 85. Determines how much of the Voice's signal is sent to the Reverb effect. When MIDI-equipped instruments are connected via a MIDI cable, it becomes possible to transfer performance and setting data between them for significantly enhanced performance and production potential. CAUTION · Connect the PSR-47E to external equipment only after turning off power for all devices. Then, turn on the power, first to the PSR-47E, then to the connected external equipment. What You Can Do With MIDI · Transferring performance and setting data between the PSR-47E and MIDI-equipped instruments or computers. (page 63) · Transferring the Song or Style data between the PSR-47E and computers. (page 65) 62 PSR-47E Owner's Manual 60 About MIDI Transferring Performance Data To and From Another Instrument By connecting the PSR-47E to other MIDI devices or a computer, the performance data of the instrument can be used on those other MIDI devices or computer, and also the performance data from other MIDI devices and computer can be received and sounded with the PSR-47E. When the instrument is connected with another MIDI device, it transmits/receives performance data. MIDI OUT MIDI IN PSR-47E MIDI IN MIDI OUT MIDI device When the instrument is connected with a computer, it transmits/ receives performance data. MIDI IN USB MIDI OUT PSR-47E A USB-MIDI interface (such as the Yamaha UX16) MIDI settings These settings should be made when transmitting/receiving performance data to a connected MIDI device or computer. Local Settings Local Control determines whether or not notes played on the instrument are sounded by its internal tone generator system; the internal tone generator is active when local control is on, and inactive when local control is off. This is the normal setting in which notes played on the instrument's keyboard are sounded by the internal tone generator system. Data received via the instrument's MIDI terminal will also be played by the internal tone generator. With this setting the instrument itself produces no sound (keyboard performance, Harmony, or Style playback), but the performance data is transmitted via the MIDI terminal. Data received via the instrument's MIDI terminal will also be played by the internal tone generator. You can set the Local Control in the Function Settings (page 60). 61 NOTE · If you can't get any sound out of the instrument, Local Control may be the most likely cause. Playing the keyboard results in no sound when Local is set to OFF. PSR-47E Owner's Manual 63 About MIDI External Clock Settings These settings determine whether the instrument is synchronized to its own internal clock (OFF), or to a clock signal from an external device (ON). [. . . ] 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 ITALY Yamaha Musica Italia S. P. A. Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 INDONESIA PT. Yamaha Music Indonesia (Distributor) PT. Nusantik Gedung Yamaha Music Center, Jalan Jend. [. . . ]