User manual YAMAHA PSR-6300E1

[. . . ] We sincerely believe that our products and the production methods used to produce them, meet these goals. In keeping with both the letter and the spirit of the law, we want you to be aware of the following: Battery Notice: This product MAY contain a small nonrechargable battery which (if applicable) is soldered in place. The average life span of this type of battery is approximately five years. When replacement becomes necessary, contact a qualified service representative to perform the replacement. [. . . ] The PSR-6300E1 can also be fitted with an optional internal hard disk for massive on-line storage capacity. Consult your Yamaha dealer for details on hard disk installation. To select a disk operation first press the [DISK] button, then press the LCD button corresponding to the operation you want to perform. SONG PLAY CUSTOM VOICE EDIT FUNCTION SONG CUSTOM RECORD ACCOMP. REC DISK NOTES · Please note that no other PSR-6300E1 functions will operate while a disk function is in progress. · For any disk operation an appropriate floppy disk must first be properly inserted into the PSR-6300E1 disk drive. The PSR-6300E1 uses only 3. 5" 2DD and 2HD type floppy disks. Make sure the disk write protect tab is set to the "write enable" position if you intend to save any data to the disk, and insert the disk with the sliding disk cover facing the disk drive and the disk label facing upward. Before a new disk can be used to save data, it must be formatted using the "FORMAT FD" function described on page 102. · If you select a disk function when no disk is present in the drive, the "No disk!Please insert a disk. " error message will appear on the display. Write protect tab closed (unlocked -- write enabled) Load From Disk Loads the specified file from a floppy disk inserted into the PSR-6300E1 disk drive, or the optional hard disk. If the FILE LIST display shown to the right is not showing, press the LIST LCD button to select it. If a hard disk is present the DIR vw dials will be available, and are used to select the directory to which the file is to be saved. The file list at the bottom of the display includes all files which currently exist on the disk and one "*** NEW ***" file. Select an existing file if you want to overwrite the file with the new data, or select the "*** NEW ***" file if you want to create a new file. With the exception of the "*** NEW ***" file, the size of each file will appear to the right of the file name in kilobytes (approximate). If you want to specify the type(s) of data to be saved, press the PROGRAM LCD button. The v and w LCD buttons to the left of the display can now be used to select various groups of data, and the LCD dials can be used to select the individual type(s) of data to be saved to the selected file. Data types which are turned ON are saved. SETUP STYLE REVOICE MULTI PAD ORGAN FLUTE REGISTRATION BANK CUSTOM STYLE All setup data -- see list on page 140. All MULTI PAD phrase, percussion, and chord data - page 42. The v and w LCD buttons select REGISTRATION memory bank groups 1. . . The LCD dials turn the individual banks within the selected group ON or OFF. The v and w LCD buttons select CUSTOM STYLE memory groups 1. . . [. . . ] Benches supplied by Yamaha are designed for seating only. 14. 6. 7. 15. PLEASE KEEP THIS MANUAL 92-469-2 169 FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. [. . . ]