User manual YAMAHA PSS-120

[. . . ] Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. The illustrations and screens as shown in this manual are for instructional purposes only, and may appear somewhat different from those on your instrument. For information on modification of system software, certain functions, or specifications due to version update of the application, please visit the following website: http://www. yamahaproaudio. com/ Windows is a registered trademark of Microsoft® Corporation in the United States and other countries. The company names and product names in this manual are the trademarks or registered trademarks of their respective companies. Amp Editor 2 Owner's Manual Contents Chapter 1 Preparing for operation 4 Chapter 6 Tree View window 98 Terms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Installing and setting up Amp Editor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 2 Tree structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] When you double-click the icon of an item, click the [Device Detail View] button, or right-click and choose [Show] from the context menu, the Detail View window for that item will appear. For details, refer to page 105. Amp Editor 99 Owner's Manual Chapter 6 Tree View window Tree structure I/O Card Device AMP ID Unmatched Device Device The devices registered in Amp Editor are shown as an icon and a name (label). ID Indicates the Device ID of the device. Model Indicates the model name of the device. Identify When you click the [Identify] button, the button will light and the indicator or display on the corresponding physical device will blink. When you perform the Identify operation on the physical device, the [Identify] button corresponding to that device will light. The type of indication and the method of operation will depend on the device, so refer to the owner's manual for your particular device. NOTE · No [Identify] button is available for amplifiers connected to the ACD1. Alert The Alert symbol will appear when an alert event occurs on an amplifier. Even after the cause of the alert has been addressed, the indication will not disappear until you click the Alert symbol. AMP ID This indicates the ID of each amplifier connected to the ACD1. I/O Card Indicates the I/O card connected to the device. Unmathced Device Indicates devices that have the same Device ID, or that feature a MAC address that is different from the one registered in Amp Editor. Amp Editor 100 Owner's Manual Chapter 6 Tree View window Operations in the Tree View window In the Tree View window you can perform various operations by double-clicking, right-clicking, or by dragging and dropping an icon. New Device You can add devices to the tree. NOTE · Up to 32 ACD1 units can be added to the tree. [New Device] button 1. To add TXn or ACD1 units, select the icon of the workspace and then click the [New Device] button, or right-click the icon to choose the [New Device. . . ]. Alternatively, to add an amplifier that connects to the ACD1 unit, select the desired ACD1's icon and then click the [New Device] button, or right-click the icon to choose [New Device. . . ]. The "Select New Device" dialog box will appear. Amp Editor 101 Owner's Manual Chapter 6 Tree View window 2. From the [Device List], select the device that you want to add, and click the [Add] button. The selected device will be added to the [Device] area at the right. NOTE · You can also add a device by double-clicking a device shown in [Device List]. · By clicking the [Add Range. . . ] button you can add multiple devices of the same model. · If you want to change the ID of the device you added, click the ID column to select an ID. 3. Click the [OK] button. A new device will be added below the specified workspace. Copying settings You can copy the settings of an amplifier that is listed in the tree. If the value specified in [New ID] already exists for another device, a message will appear, and the [Current ID] value will remain unchanged. NOTE · AMP ID only changes the setting within Amp Editor. To change the AMP ID of the amplifier itself, use the AMP ID switch located on the rear panel of the amplifier. For details on the AMP ID switch, refer to "Connections with the PC-N or Tn series" in the ACD1 owner's manual. Amp Editor 104 Owner's Manual Chapter 6 Tree View window Disengage Device Maching This operation removes an offline device from the workspace and moves it to Unmatched Device. NOTE · You can drag and drop removed devices from Unmatched Device back into the workspace. 1. 3. Right-click the icon of the item that you want to remove. From the context menu, choose [Disengage Device Matching]. In the confirmation dialog box, click the [OK] button. The item will be removed, and moved to Unmatched Device. Delete You can delete an offline device. 1. 3. Right-click the icon of the item that you want to delete. In the confirmation dialog box, click the [OK] button. The selected item will be deleted. Editing a scene (Scene Manager) When you right-click an amplifier's icon and choose [Scene Manager] from the context menu that appears, the "Scene Manager" dialog box will appear (page 49). Here you can store, recall, or edit scenes for an amplifier. [. . . ] Can't specify the device's IP address from the DHCP server. A device is not shown in the Tree View window. The device was started up before the DHCP server. The device's IP Address Mode is set to Manual. [. . . ]