User manual YAMAHA PSS-370

[. . . ] · You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE. · You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers. · You may not use the SOFTWARE to distribute illegal data or data that violates public policy. · You may not initiate services based on the use of the SOFTWARE without permission by Yamaha Corporation. [. . . ] DISCLAIMER OF WARRANTY ON SOFTWARE You expressly acknowledge and agree that use of the SOFTWARE is at your sole risk. The SOFTWARE and related documentation are provided "AS IS" and without warranty of any kind. NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, YAMAHA EXPRESSLY DISCLAIMS ALL WARRANTIES AS TO THE SOFTWARE, EXPRESS, AND IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SPECIFICALLY, BUT WITHOUT LIMITING THE FOREGOING, YAMAHA DOES NOT WARRANT THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE SOFTWARE WILL BE CORRECTED. PSS-370 V3 Editor Installation Guide 1 5. LIMITATION OF LIABILITY YAMAHA'S ENTIRE OBLIGATION HEREUNDER SHALL BE TO PERMIT USE OF THE SOFTWARE UNDER THE TERMS HEREOF. IN NO EVENT SHALL YAMAHA BE LIABLE TO YOU OR ANY OTHER PERSON FOR ANY DAMAGES, INCLUDING, WITHOUT LIMITATION, ANY DIRECT, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, EXPENSES, LOST PROFITS, LOST DATA OR OTHER DAMAGES ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THE SOFTWARE, EVEN IF YAMAHA OR AN AUTHORIZED DEALER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. In no event shall Yamaha's total liability to you for all damages, losses and causes of action (whether in contract, tort or otherwise) exceed the amount paid for the SOFTWARE. 6. THIRD PARTY SOFTWARE Third party software and data ("THIRD PARTY SOFTWARE") may be attached to the SOFTWARE. If, in the written materials or the electronic data accompanying the Software, Yamaha identifies any software and data as THIRD PARTY SOFTWARE, you acknowledge and agree that you must abide by the provisions of any Agreement provided with the THIRD PARTY SOFTWARE and that the party providing the THIRD PARTY SOFTWARE is responsible for any warranty or liability related to or arising from the THIRD PARTY SOFTWARE. Yamaha is not responsible in any way for the THIRD PARTY SOFTWARE or your use thereof. · Yamaha provides no express warranties as to the THIRD PARTY SOFTWARE. Follow the appropriate instructions below. · Studio Manger · PSS-370 Editor · DME-N Network Driver (for Windows) / Network-MIDI Driver (for Mac) Studio Manager Installation Studio Manager is a cross-platform application that enables you to use multiple Editor programs for remotely controlling Yamaha hardware from your computer, and allows you to save the Editor settings for instant recall. For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in the Studio Manager and each Editor. You can download the latest version of Studio Manager at the following website. For specific installation instructions, refer to the installation guide included in the downloaded file. http://www. yamahaproaudio. com/ PSS-370 V3 Editor Installation Guide 4 PSS-370 Editor Installation Follow the instructions below to install the software programs. 1 Double-click "setup. exe" (Windows) or "Install PSS-370 V3 Editor. pkg" (Mac) in the compressed file (you have downloaded). A setup dialog of PSS-370 Editor is displayed. NOTE When using Windows Vista / 7, if the "User Account Control" window appears, click [Continue] or [Yes]. 2 Follow the on-screen instructions to install the software. NOTE For specific instructions on using the software, refer to the PDF manual from the [HELP] menu in each program. Driver Installation To operate the PSS-370 from your computer via Ethernet, you'll need to install the DME-N Network Driver software or the Network-MIDI Driver software. You'll also need to set up DME-N Network Driver or Network-MIDI Driver after installation. For details, refer to the "DME-N Network Driver Installation Guide for PSS-370" or the "Network-MIDI Driver Installation Guide. " You'll refer to "Network Settings" for the set values of PSS-370 and your computer (page 6. ) DME-N Network and Network-MIDI Driver are software that transfers MIDI data back and forth between your computer and the PSS-370 via Ethernet cable. Connect the computer to the PSS-370 by using an Ethernet cable via a network switch. When you connect the computer to the PSS-370 directly, you can use a crossover cable. Ethernet cable Editor Network switch or Crossover cable Driver Computer Ethernet cable PSS-370 You can download the latest version of DME-N Network Driver and Network-MIDI Driver at the following website. For specific installation instructions, refer to the installation guide. http://www. yamahaproaudio. com/ PSS-370 V3 Editor Installation Guide 5 Network Settings When you connect the computer to the PSS-370 directly · Settings of the PSS-370 You can use the following initial settings. IP address Gateway address Subnet mask 192. 168. 0. 128 192. 168. 0. 1 255. 255. 255. 0 · Settings of the computer We recommend that you make the following settings. IP address Subnet mask Default gateway (Router) 192. 168. 0. 3 255. 255. 255. 0 192. 168. 0. 1 When you connect the computer to the PSS-370 via LAN Make the network settings of the PSS-370 and your computer in accordance with your LAN. Please contact your network administrator for further details. [. . . ] If the "User Account Control" window appears, click [Continue] or [Yes]. When using Windows XP Select [START] [Control Panel] [Add/Remove Programs] [Install/Uninstall], then select the application to be removed and click [Add/Remove. . . ]. Follow the on-screen instructions to uninstall the application. Troubleshooting When controlling the PSS-370 from your computer via Ethernet, the PSS-370 does not operate correctly. · Have you installed the latest DME-N Network Driver or the latest Network-MIDI Driver?· Is the Ethernet cable connected correctly? Connect the computer to the PSS-370 by using an Ethernet cable via a network switch or router. [. . . ]