User manual YAMAHA PSS-80

[. . . ] RESTRICTIONS · You may not engage in reverse engineering, disassembly, decompilation or otherwise deriving a source code form of the SOFTWARE by any method whatsoever. · You may not reproduce, modify, change, rent, lease, or distribute the SOFTWARE in whole or in part, or create derivative works of the SOFTWARE. · You may not electronically transmit the SOFTWARE from one computer to another or share the SOFTWARE in a network with other computers. · You may not use the SOFTWARE to distribute illegal data or data that violates public policy. [. . . ] Any dispute or procedure shall be heard before the Tokyo District Court in Japan. If for any reason a court of competent jurisdiction finds any portion of this Agreement to be unenforceable, the remainder of this Agreement shall continue in full force and effect. 8. COMPLETE AGREEMENT This Agreement constitutes the entire agreement between the parties with respect to use of the SOFTWARE and any accompanying written materials and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter of this Agreement. No amendment or revision of this Agreement will be binding unless in writing and signed by a fully authorized representative of Yamaha. Special Notices · The software and this manual are the exclusive copyrights of Yamaha Corporation. · Please read carefully the Software Licensing Agreement at the front of this manual before installing the application. · Copying of the software or reproduction of this manual in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. · Yamaha makes no representations or warranties with regard to the use of the software and documentation and cannot be held responsible for the results of the use of this manual and the software. · Future upgrades of application and system software and any changes in specifications and functions will be announced at the following website. http://www. yamahaproaudio. com/ · The screen displays as illustrated in this manual are for instructional purposes, and may appear somewhat different from the screens which appear on your computer. · The illustrations and LCD screens as shown in this owner's manual are for instructional purposes only, and may appear somewhat different from those on your instrument. · Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. field in the device information area (2) below the list. [New] Button Click this button to add a new device to the list. Edit the device's parameters as required via the fields in the device information area (2) below the list, then click the [Apply] button to add the specified device. [Duplicate] Button This button adds a device to the list by copying the data from the currently selected device. Edit the new device's parameters as required via the fields in the device information area (2) below the list, then click the [Apply] button to add the specified device. [Remove] Button Deletes the selected device from the list. If the PSS-80 is used alone, it can be searched using the [Advanced Settings] button after setting the IP address properly. For details on the default value of IP address, refer to "Connect the PSS-80 to your computer via Ethernet" of the PSS-80 owner's manual. n The MAC address must be set properly or communication with the device will not be possible. n The MAC address of the connected device cannot be changed. Device Port No. The MIDI port number of the device selected in the Target Device List can be set via this menu. The MIDI port number also functions as device ID number. It should be set to "1" for PSS-80. n The MIDI port number must be set properly or communication with the device will not be possible. [Apply] Button Click the [Apply] button after editing the Device Name, Device IP Address, Device MAC Address, or Device Port No. parameters to actually apply the changes. Also, devices added to the Target Device List (1) by pressing the [NEW] or [DUPLICATE] buttons will only actually be registered for communication with the DME-N Network Driver when the [Apply] button is pressed. 3 [Advanced Settings] Button Opens the "Advanced Settings" dialog box. This window provides access to advanced settings. [. . . ] If you are connecting the PSS-80 to your computer in a one-to-one connection, we recommend that you make the following initial settings. IP address Gateway address Subnet mask 192. 168. 0. 129 192. 168. 0. 1 255. 255. 255. 0 For details on settings when connecting to a LAN, refer to the PSS-80 Editor installation guide. The IP address of the PSS-80 must not conflict with that of any other device on the network. · Did you enter the correct MAC address of the PSS-80? The MAC address of the PSS-80 can be checked in the PREFERENCE 2 screen on the PM5D console if the PSS-80 is cascade-connected to the PM5D. If the PSS-80 is used alone, it can be searched in the "Advanced Settings" dialog box when the IP address is known. [. . . ]