User manual YAMAHA QY300E2

[. . . ] c = 0 BANK SEL MSB: v = 0:GM select, 127:RHYTHM select *2 c = 32 BANK SEL LSB: Always ignored c = 1 MODULATION: v = 0 - 127 *2 c = 6 DATA ENTRY MSB: v = 0 - 127 *1 c = 38 DATA ENTRY LSB: v = 0 - 127 *1 c = 7 MASTER VOLUME: v = 0 - 127 c = 10 PANPOT: v = 0 - 127 c = 11 EXPRESSION: v = 0 - 127 c = 64 SUSTAIN SWITCH: v = 0 ~ 63 : OFF, 64 ~ 127 : ON *2 c = 66 SOSTENUTO: v = 0 ~ 63 : OFF, 64 ~ 127 : ON *2 c = 84 PORTAMENT CONTROL:v = 0 - 127 *2 c = 91 EFFECT SEND LEVEL 1: v = 0 - 127 c = 96 DATA ENTRY INC: v = 127 *1 c = 97 DATA ENTRY DEC: v = 127 *1 *1 Used only when setting parameter designated by RPN. For both melody and rhythm voices, PANPOT change is relative to the voice's preset value. PORTAMENT CONTROL portamento time is fixed at 0. BANK SELECT MSB v=0 selects GM melody voice, v=127 selects GM rhythm voice. [. . . ] An ALL NOTES OFF message received via MIDI terminates only the MIDI-driven notes on the relevant channel. The sequencer does not record the message. SYSTEM EXCLUSIVE MESSAGE F0H . . . . . F7H SW 1 MIDI Transmit Channel Transmit channel settings and transmit ON/OFF can be set for each track of the channel. SW 2 MIDI Control Transmission can be set ON or OFF. ­8­ MIDI Data Format (2) RECEIVE FLOW NOTE OFF 8nH SW1 NOTE ON/OFF 9nH POLYPHONIC KEY PRESSURE AnH CONTROL CHANGE BnH PROGRAM CHANGE CnH CHANNEL PRESSURE DnH PITCH BEND CHANGE EnH SW2 TIMING CLOCK START CONTINUE STOP SONG POSITION POINTER SONG SELECT ALL SOUND OFF RESET ALL CONTROLLERS LOCAL CONTROL OMNI MODE OFF OMNI MODE ON MONO MODE ON POLY MODE ON F8H FAH FBH FCH F2H F3H SW4 BnH 78H BnH 79H BnH 7AH BnH 7CH BnH 7DH BnH 7EH BnH 7FH SW4 SYSTEM EXCLUSIVE MESSAGE F0H . . . . . F7H F0H 43H 0nH 0AH 04H 0AH F0H 43H 0nH 7EH 04H 32H F0H 43H 0nH 0AH 04H 0AH F0H 43H 0nH 7EH 02H 56H LM__0086QY ( QYSEQ DATA ) LM__0086SQ ( SONG DATA ) LM__0018HQ ( HQSEQ DATA ) LM__0018SQ ( SONG DATA ) SW3 SW4 MIDI IN (3) TRANSMIT/RECEIVE DATA (3-1) CHANNEL VOICE MESSAGE Transmission occurs only during recording or playback. Transmit channel and transmit ON/OFF can be set for each track. The system always receives over all channels. For multitrack recording, tracks 0 -15 respectively record MIDI CH 0 -15 data. * During RECORD MODE, recording is normally set to "omni on. " During multitrack recording, however, "omni" is set "off" and data is divided according to MIDI channel (CH 0 -15). (3-1-1) NOTE OFF STATUS 1000nnnn NOTE NUMBER 0kkkkkkk VELOCITY 0vvvvvvv (8nH) n = 0~15 TRACK CHANNEL NUMBER k = 0 (C-2) ~ 127 (G8) v: ignored Recording only. During playback, converted to 9nH kkH 00H. (3-1-2) NOTE ON/OFF STATUS 1001nnnn NOTE NUMBER 0kkkkkkk VELOCITY 0vvvvvvv 00000000 (9nH) n = 0~15 TRACK CHANNEL NUMBER k = 0 (C-2) ~ 127 (G8) (v= 0) NOTE ON / (v=0) NOTE OFF During recording, can set velocity step recording and edit input ON/OFF. (3-1-3) POLYPHONIC KEY PRESSURE STATUS 1010nnnn NOTE NUMBER 0kkkkkkk VALUE 0vvvvvvv (AnH) n = 0~15 TRACK CHANNEL NUMBER k = 0 (C-2) ~ 127 (G8) v = 0 - 127 (3-1-4) CONTROL CHANGE sum F7H sum F7H sum F7H sum F7H STATUS 1011nnnn (BnH) n = 0~15 TRACK CHANNEL NUMBER CONTROL NUMBER 0ccccccc CONTROL VALUE 0vvvvvvv All control-change data can be recorded and replayed. Bank Select MSB and LSB are recorded in combination with received Program Change data; you cannot record Bank Select data independently. During playback, the system transmits Bank Select data followed by the corresponding Program Change data; it is not possible to transmit unaccompanied Bank Select data. SW 1 Velocity Filter Sets velocity step recording and edit input ON/OFF. (3-1-5) PROGRAM CHANGE STATUS 1100nnnn (CnH) n = 0~15 TRACK CHANNEL NUMBER PROGRAM NUMBER 0ppppppp p = 0 ~ 127 When the system receives Program Change data, it records it in combination with the most recently received Bank Select data. If the system has not received any Bank Select data, it records the Bank Select value as 0 (MSB=0, LSB=0). During transmission, the system always includes Bank Select data together with Program Change data. It is not possible to transmit unaccompanied Program Change data. SW 2 Clock Condition Select Determines whether the system uses the internal clock or the clock received over MIDI IN. SW 3 MIDI Control Sets reception ON or OFF. (3-1-6) CHANNEL PRESSURE STATUS VALUE STATUS LSB MSB 1101nnnn 0vvvvvvv 1110nnnn 0vvvvvvv 0vvvvvvv (DnH) n = 0~15 TRACK CHANNEL NUMBER v = 0 ~ 127 (EnH) n = 0~15 TRACK CHANNEL NUMBER PITCH BEND LSB 0 ~ 127 PITCH BEND MSB 0 ~ 127 SW 4 INPUT FILTER INPUT FILTER settings determine whether reception is enabled or disabled. (3-1-7) PITCH BEND CHANGE (3-2) CHANNEL MODE MESSAGE The system can record and replay the following messages. RESET ALL CONTROLLERS BnH 78H LOCAL CONTROL BnH 7AH OMNI MODE OFF BnH 7CH OMNI MODE ON BnH 7DH MONO MODE ON BnH 7EH POLY MODE ON BnH 7FH ­9­ MIDI Data Format (3-3) SYSTEM COMMON MESSAGE The system supports both transmission and reception of these messages. These messages provide function control data. They cannot be recorded as sequencer data. (3-3-1) SONG POSITION POINTER STATUS LSB MSB 11110010 0vvvvvvv 0vvvvvvv (F2H) SONG POSITION LSB SONG POSITION MSB Transmitted when song position is changed during SONG PLAY MODE. Received in SONG PLAY MODE during standby. (3-3-2) SONG SELECT STATUS SONG NO 11110011 0vvvvvvv (F3H) v=0-9 Transmitted when a song is selected during SONG PLAY MODE. [. . . ] : : : : :-------------------+----------------+----------------+----------------: :Basic Default : 1 - 16 : 1 - 16 *1 : memorized : :Channel Changed : 1 - 16 *2 : x : : :-------------------+----------------+----------------+----------------: : Default :3 :3 : : :Mode Messages : x :x : : : Altered : ************** : x : : :-------------------+----------------+----------------+----------------: :Note : 0 - 127 : 0 - 127 *3 : : :Number : True voice: ************** : 0 - 127 : : :-------------------+----------------+----------------+----------------: :Velocity Note ON : o 9nH, v=1-127 : o v=1-127 : : : Note OFF : x 9nH, v=0 :x : : :-------------------+----------------+----------------+----------------: :After Key's :x :x : : :Touch Ch's :x :x : : :-------------------+----------------+----------------+----------------: :Pitch Bender :x : o 0-24 semi *3 :12bit resolution: :-------------------+----------------+----------------+----------------: : 0, 32 : x : o MSB only *3 :Bank Select : : 1 :x :o *3 :Modulation Wheel: : 6, 38 : x :o *3 :Data Entry : : 7 :x :o *3 :Volume : : Control 10 : x :o *3 :Panpot : : 11 : x :o *3 :Expression : : Change 64 : x :o *3 :Hold 1 : : 66 : x :o *3 :Sostenuto : : 84 : x :o *3 :Portamento Cont. : : 91 : x :o *3 :Effect Depth : : 96, 97 : x :o *3 :Data INC, DEC : : 100, 101 : x :o *3 :RPN LSB, MSB : : 120 : x :o *3 :All Sound Off : : 121 : x :o *3 :Reset All Cont. : :-------------------+----------------+----------------+----------------: :Prog :x : o 0 - 127 *3 : : :Change : True # : ************** : : : :-------------------+----------------+----------------+----------------: :System Exclusive :x :o *3 : : :-------------------+----------------+----------------+----------------: :System : Song Pos : x :x : : : : Song Sel : x :x : : :Common : Tune :x :x : : :-------------------+----------------+----------------+----------------: :System :Clock :x :x : : :Real Time :Commands: x :x : : :-------------------+----------------+----------------+----------------: :Aux :Local ON/OFF : x :x : : : :All Notes OFF: x :o : : :Mes- :Active Sense : o :o : : :sages:Reset :x :x : : +----------------------------------------------------------------------+ :Notes: *1 = if REC mode, receive all channels. : : *3 = receive if input filter switch is off. : : : +----------------------------------------------------------------------+ Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO o : Yes Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO x : No ­ 11 ­ YAMAHA [ Music Sequencer --- sequencer part ] Date:24-MAR-1994 Model QY300 MIDI Implementation Chart Version : 1. 0 +----------------------------------------------------------------------+ : : Transmitted : Recognized : Remarks : : Function . . . [. . . ]