User manual YAMAHA R-100

[. . . ] Retain Instructions ­ The safety and operating instructions should be retained for future reference. Heed Warnings ­ All warnings on the unit and in the operating instructions should be adhered to. Follow Instructions ­ All operating and other instructions should be followed. Water and Moisture ­ The unit should not be used near water ­ for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. [. . . ] If these wires are reversed, the sound will be unnatural and will lack bass. Do not let the bare speaker wires touch each other and do not let them touch the metal parts of this unit as this could damage this unit and/or speakers. q One or two speaker systems can be connected to this unit. If you connect only one speaker system, connect it to either the SPEAKERS A or B terminals. q Use speakers with the specified impedance shown on the rear of this unit. How to Connect: Red: positive (+) Black: negative (­) Press up the tab. 5mm (1/4") insulation from the speaker wires. ] Press down the tab and secure the wire. ABOUT THE ACCESSORY TERMINALS AC OUTLETS (U. S. A. , Canada Europe and General models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 SWITCHED OUTLETS (Australia and U. K. models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SWITCHED OUTLET Use these to connect the power cords from your components to this unit. The power to the SWITCHED outlets is controlled by this unit's POWER switch or the provided remote control transmitter's POWER key. These outlets will supply power to any component whenever this unit is turned on. The maximum power (total power consumption of components) that can be connected to the SWITCHED AC OUTLETS is 100 watts (200 watts for U. S. A. If so, it can be re-programmed by simply following the PRESET TUNING steps. 5 PRESET STEREO FM MHz 0 20 40 60 100 MEMORY AUTO TUNING Shows the displayd station has been programmed to A1. * In the same way, program other stations to A2, A3 . . . * You can program more stations on other pages in the same way by selecting other pages in step 2. 11 REMOTE CONTROL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility (components with an mark), then this remote control transmitter will also control various functions of each component. Please consult YAMAHA dealer for information on which components are compatible with the remote control transmitter. KEY FUNCTIONS For Control of This Unit SLEEP Turns the power on/off. POWER SKIP PHONO SEARCH CD PAUSE/STOP PLAY The power to the receiver is automatically turned off one hour after this key is pressed (so that "SLEEP" illuminates in the display). DISC SKIP A/B/C/D/E TUNER Selects input source. ­ PRESET + AUX DIR A DIR B TAPE MON PLAY REC/PAUSE STOP REC MUTE DECK A/B ­ VOLUME + Turns the volume level up/down. For Other Component Control Identify the remote control transmitter keys with your component's keys. If these keys are identical, their function will be the same. On each key function, refer to the corresponding instruction on your component's manual. SLEEP POWER Controls compact disc player. * DISC SKIP is applicable only to compact disc auto changer. SKIP PHONO SEARCH CD PAUSE/STOP PLAY DISC SKIP A/B/C/D/E TUNER Controls tuner + : Selects higher preset station number. ­ : Selects lower preset station number. A/B/C/D/E: Selects the page (A ­ E) of preset stations. ­ PRESET + AUX DIR A DIR B TAPE MON PLAY REC/PAUSE STOP REC MUTE Controls tape deck. * DIR A, B and DECK A/B are applicable only to double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running. DECK A/B ­ VOLUME + STANDBY mode (Europe model only) While the power is on, pressing the POWER key on the remote control transmitter switches the unit to the STANDBY mode. [. . . ] Change position of the main unit. FM AM Remote control transmitter There is distortion and clear reception cannot be obtained even with a good FM antenna. A desired station cannot be tuned in with Auto tuning. A desired station cannot be tuned in with Auto tuning. There are continuous crackling and hissing noises. [. . . ]