User manual YAMAHA R-2000

[. . . ] Verificare che tutte le parti seguenti siano contenute nell'imballaggio dell'apparecchio. Desembale el aparato y verificar que los siguientes accesorios están en la caja. Controleer na het uitpakken of de volgende onderdelen voorhanden zijn. U. K. model Modèle pour le Royaume-Uni Großbritannien-Modell Brittisk modell Modello per la Gran Bretagna Modelo para R. U. [. . . ] By this function, this unit performs automatic tuning and stores RDS stations with strong signals sequentially. Up to 40 stations are stored automatically to the preset station buttons in the same way as in the manual preset tuning method on page 9. 3 1 To store stations 2 When the automatic preset tuning is finished The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedure of the section "To recall a preset station" on page 9. 1 FM/AM FM To recall a preset station 2 MEMORY MAN'L/AUTO FM Press and hold for about 3 seconds. Simply follow the procedure of the section "To recall a preset station" on page 9. A recalled station is shown by the frequency or station name on the display. Notes q The automatic preset tuning search will be performed through all RDS network frequencies until stations are stored up to E8. If the number of received stations is not enough to be stored up to E8, the search is finished automatically after searching through all frequencies. q With this function, the settings of the MODE, BLEND and IF MODE buttons are stored along with stations. q With this function, only RDS stations with sufficient signal strength are stored automatically. If the station you want to program is weak in signal strength, tune to it in monaural manually and program it by following the procedure of the section "To store stations" on page 9. * There may be a case that this function cannot receive a station which could be received by the automatic tuning method. This is because this function receives a large volume of PI (Program Identification) data along with the station. Whenever pressed, the mode changes into the PS mode, PTY mode and returns to usual mode in turn. * When an RDS station is received, the display is automatically turned into the PS mode. Do not press the FREQ/PS/PTY button until the display is turned into the PS mode. If the button is pressed before the display mode is changed, it may occur that "NO PS" flashes on the display. This is because the unit has not received all of the RDS data on the station yet. PS mode The name of the station being received is displayed. (If you had stored a name of your own giving to the station, the name is displayed. ) If the station is not an RDS station, "NO PS" flashes on the display and then returns to usual mode. PS/PTY SEEK PTY mode FREQ/PS PTY SHIFT ENTER A program type for the station being received is displayed. If the RDS station does not employ the PTY data service, "NO PTY" flashes on the display and then returns to the PS mode. If the station is not an RDS station, "NO PTY" flashes on the display and then returns to usual mode. Usual mode The frequency of the station being received is displayed. (If you had stored a name of your own giving to the station, the name is displayed. ) Note When PS or PTY data reception is not possible due to poor reception conditions, "NO PS" or "NO PTY" flashes on the display in each mode. In such a case, use the BLEND, IF MODE and/or MODE buttons to improve sound quality. After that, when you changes to the PS or PTY mode, PS or PTY data will be displayed. 14 English Calling a preset RDS station by the station name (PS SEEK) You can call a desired RDS station stored in this unit by only inputting the name of the station in the PS mode. [. . . ] The station is too weak. Previously preset stations can no longer be tuned in. A desired station cannot be tuned in with Automatic tuning. There are continuous crackling and hissing noises. There are buzzing and whining noises (especially in the evening). The tuner has been unplugged for a long period. [. . . ]