User manual YAMAHA RP-U100

[. . . ] U YAMAHA PERSONAL RECEIVER RP-U100 Owner's Manual Thank you for purchasing the Yamaha RP-U100 Personal Receiver. In order to fully utilize the superior features of the Yamaha RP-U100 and to enjoy years of trouble-free operation, please read this Owner's Manual carefully before use. Contents Features . 2 Digital Sound Field Processing (DSP) . 11 Locating Radio Stations Using Auto Search . [. . . ] · AUX2 Press the AUX2 key to select the equipment connected to the ANALOG AUX 2 IN connectors as the input source. · TUNER Press this key repeatedly to select the following tuner bands: FM Auto Stereo, FM Mono, or AM. VIRTUAL USB PCM DD FM AM ST DSP MEMORY AUX1 AUX2 TUNER · PC Press the PC key repeatedly to select the following PC inputs: USB, PC_DG, and PC_AN. USB select the USB port, PC_DG selects the DIGITAL PC COAX IN and DIGITAL PC OPT IN, and PC_AN selects the ANALOG PC IN. PC iUSB j VIRTUAL USB PCM DD FM AM ST DSP MEMORY 92. 50 VOL PC PC (digital) VIRTUAL USB PCM DD FM AM ST DSP MEMORY USBDG VOL PC_DG VOL 3. See page 11 for more information about using the tuner. Use the volume control to adjust the volume level. PC PC VIRTUAL USB PCM DD FM AM ST DSP MEMORY PC_AN VOL PC (analog) Note: The DIGITAL PC OPT IN has priority over the DIGITAL PC COAX 10 Using the Tuner Locating Radio Stations Manually 1. Use the P-SET key to select Frequency Display mode. VIRTUAL USB PCM DD FM AM ST DSP MEMORY Locating Radio Stations Using Auto Search 1. Press the TUNER key repeatedly to select one of the following tuner bands: FM Auto Stereo, FM Mono, or AM. FM Auto Stereo VIRTUAL USB PCM DD FM AM ST DSP MEMORY FM Mono VIRTUAL USB PCM DD FM AM ST DSP MEMORY 92. 50 VOL 92. 50 92. 50 VOL In Frequency Display mode, the radio frequency is displayed, as shown here. Press the TUNER key repeatedly to select one of the following tuner bands: FM Auto Stereo, FM Mono, or AM. FM Auto Stereo VIRTUAL USB PCM DD FM AM ST DSP MEMORY VOL AM VIRTUAL USB PCM DD FM AM ST DSP MEMORY 1170G VOL FM Mono VIRTUAL USB PCM DD FM AM ST DSP MEMORY 2. Use the P-SET key to select the Frequency Display mode. VIRTUAL USB PCM DD FM AM ST DSP MEMORY 92. 50 VOL 92. 50 VOL AM VIRTUAL USB PCM DD FM AM ST DSP MEMORY 92. 50 VOL Frequency Display mode 1170G VOL In Frequency Display mode, the radio frequency is displayed, as shown here. Press and hold the Down [] or Up [®] key to start Auto Search. Auto Search starts from the current radio frequency. Use the Down [] key to search down; the Up [®] key to search up. The RP-U100 stops searching when it locates a station. To search for another station, repeat step 3. Note: If Auto Search cannot locate a station due to its weak signal, try locating the station manually. 3. Use the Down [] and Up [®] keys to locate radio stations. Use the Down [] key to lower the frequency; the Up [®] key to increase it. Note: If there is noise in an FM Stereo broadcast, try switching to FM Mono. 11 Using the Presets You can store your favorite radio stations in the 40 presets, which are organized into five groups (A­E), with eight presets in each group. Preset "B3, " for example, is preset number 3 of group B. Storing Presets Manually 1. Locate the radio station that you want to store, as explained on page 11. Press and hold the P-SET key until "MEMORY" flashes on the display. P-SET 1. Press the TUNER key repeatedly to select one of the following tuner bands: FM Auto Stereo, FM Mono, or AM. [. . . ] The preset settings are lost if the RP-U100 is unplugged for more than two weeks. Reprogram the presets. · Troubleshooting the FM Tuner Symptom Possible Cause Remedy Adjust the angle and location of the FM antenna to minimize the noise. If that does not eliminate Interference from the ignition system of a motorcycle or auto- the noise, install an outdoor FM antenna. Use a coaxial cable for the antenna connection. The antenna signal is too weak or the signal of the station you are receiving is weak. [. . . ]