User manual YAMAHA RS-500

[. . . ] Box 8120, IS-128 Reykjavik, Iceland Tel: 525 5000 Yamaha Music (Russia) Room 37, bld. 7, Kievskaya street, Moscow, 121059, Russia Tel: 495 626 5005 Yamaha Music Europe GmbH Siemensstraße 22-34, 25462 Rellingen, Germany Tel: +49-4101-3030 HONG KONG ITALY Tom Lee Music Co. , Ltd. 11/F. , Silvercord Tower 1, 30 Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: 2737-7688 Yamaha Music India Pvt. [. . . ] 2F, Yunhedasha, 1818 Xinzha-lu, Jingan-qu, Shanghai, China Tel: 021-6247-2211 THE NETHERLANDS/ BELGIUM/LUXEMBOURG HEAD OFFICE Yamaha Corporation, Digital Musical Instruments Division SY55 Nakazawa-cho 10-1, Naka-ku, Hamamatsu, Japan 430-8650 Tel: +81-53-460-2432 English PRECAUTIONS Before using, please read this assembly manual, and use this product in a safe and proper manner. * Please keep this manual in a safe place for future reference. WARNING If this symbol is ignored and the equipment is used improperly, fatal injury to persons or serious damage could occur. · Do not let small children assemble or set up this product by themselves, or they may be injured. Always assemble this product with adult supervision. · Be careful with the edges of the Cymbal Holders and the Tom Holders. The sharp holder ends may result in injury. · If this product is used with a Rack System or Cymbal Stand, make sure all bolts are tightened firmly. Also, when adjusting the height or angle, do not suddenly loosen the bolts. Loose bolts may result in the rack overturning or parts dropping, causing injury. · Always set the product on a flat and solid surface. Placement on a sloping, unstable surface or on steps may result in the product being unstable and subject to overturning. Doing so may result in injury or damage/deterioration to the product. · Do not sit or step on the rack. The rack may overturn or be damaged, resulting in injury. If this symbol is ignored and the equipment is used improperly, there is a danger or injury to persons handling the equipment, and material damage could occur. CAUTION · Watch your fingers when adjusting clamps. They may become pinched, resulting in injury. · Be careful around pipe ends, inside the pipe and screw ends. · Do not attach acoustic drums to the electronic drum rack. [. . . ] Then, rotate the snare clamp rod to the position shown in Figure 3. Loosen the bolts of the tom holders and rotate the three tom holders into the positions shown in Figure 3. Then, retighten the bolts. Cymbal holder Tom holder Cymbal holder 5 Drum trigger module clamp Bolts r 8 8 8 8 Bolts 6 Bolts t 9 7 Bolts e Snare clamp rod 8 Bolts y Pipe q Tom holder Left pillar Right pillar Left leg Right leg [Figure 3: Example of standard assembly] CAUTION · Take special care when handling the tom holders in order to avoid injuring yourself with their sharp ends. 9. [. . . ]