User manual YAMAHA RS65

[. . . ] RS65 e e q w w w q w e w r r t y y t 1 2 q u 3 4 e 5 w q r t u y YAMAHA Electronic Drum Rack System RS65 Assembly Instructions Thank you for purchasing the Yamaha Electronic Drum Rack System RS65. Before using, thoroughly read these assembly instructions, and use this product safely and correctly. RS65 Rack Stand Parts * Before assembling the rack stand, make sure all of the parts shown below are included. RS65+ Pad grouping : Set up example Overall Assembly RS65 (When the box is opened) Small Screws M5 X8 (Module Holder Fixing Screws X4) ePCY65S e Cable Band (x10) q Assembly Instructions (this sheet) w Pad and Drum Trigger Grouping (option) q DTXPRESS Drum Trigger Module w TP65/65S Drum Pad e PCY65/65S Cymbal Pad w w wTP65S r rKP65 Kick Pad t HH65 Hi-hat Control Pedal y Foot Pedal * FP-700 etc. y t WARNING Before using, please read this "Assembly Instruction" sheet, and use this product in a safe and proper manner. Especially for children, parents or an instructor should teach the children the proper manner in which to use the device. If this symbol is ignored and the equipment is used improperly, fatal injury to persons or serious damage could occur. If this symbol is ignored and the equipment is * Specifications are subject to change without notice. CAUTION used improperly, there is a danger of injury to persons handling the equipment, and material damage could occur. Always set the instrument on a flat and solid surface. [. . . ] Feet may become entangled in the cables resulting in falls. Do not put your hands or feet under the foot pedal or foot switch. They may be pinched resulting in injury. Watch your fingers when adjusting clamps. They may become pinched resulting in injury. Be careful around pipe ends, inside the pipe and screw ends. Do not attach acoustic drums to the electronic drum rack. Clamps may be damaged and drums may drop, causing injury. Caution (including danger, or warning). This mark indicates cautions in which you should pay close attention to. Acts indicated with this icon are prohibited and should not be attempted. This icon indicates acts that you are urged to follow. * Specifications are subject to change without notice. RS65 Assembly * Parts for the RS65's main structure have already been assembled before packing. After removing the unit from the box, follow the instructions described below to complete the assembly. A Phillips (+) screwdriver is required when attaching the DTXPRESS module. Please prepare one before starting assembly. 1 After removing the unit from the box, remove all cushion material. 3 Attaching the DTXPRESS 3-1 Remove the module holder from the holder clamp, and use the supplied screws to attach the DTXPRESS . Make sure only the supplied screws are used. [. . . ] After assembly is complete, setup the kick pad, hi-hat control pedal, etc. , and connect the cables. Use the supplied cable bands to secure the cables to the frame pipes to keep cables out of the way during performance. If the rack is moved even after setup is complete, make sure the bolts are loosened before moving the rack. [. . . ]