User manual YAMAHA RS70

[. . . ] · Do not use or keep the product in places with extremely high temperature (places in direct sun- ASSEMBLY INSTRUCTIONS INTRODUCTION Thank you for purchasing the Yamaha Electronic Drum Rack System RS70. Before using, thoroughly read these assembly instructions, and use this product safely and correctly. light, close to a heater, in a closed car, etc. ) or damp (bathroom, outside on a rainy day, etc. ). [. . . ] The pad may drop, the rack or pipes may slip, pinching or causing injury to hands or fingers. The rack may overturn or be damaged resulting in injury. Please be careful when children are close to or touching the product. The product has many pipes and arms so careless movement around the product may result in injury. When setting the pads and modules, please pay close attention in regards to the handling and setting of cables. Feet may become entangled in the cables resulting in falls. Cable Band (x10) CAUTION If this symbol is ignored and the equipment is used improperly, there is a danger of injury to persons handling the equipment, and material damage could occur. Do not put your hands or feet under the foot pedal or foot switch. They may be pinched resulting in injury. Watch your fingers when adjusting clamps. They may become pinched resulting in injury. Be careful around pipe ends, inside the pipe and screw ends. Do not attach acoustic drums to the electronic drum rack. Clamps may be damaged and drums may drop, causing injury. Assembly Instructions (this sheet) * Specifications are subject to change without notice. RS70 Assembly * Parts for the RS70's main structure have already been assembled before packing. [. . . ] After assembly is complete, setup the kick pad, hi-hat control pedal, etc. , and connect the cables. Use the supplied cable bands to secure the cables to the frame pipes to keep cables out of the way during performance. [. . . ]