User manual YAMAHA RX-E100

[. . . ] UCA RX-E100 / CDX-E100 Natural Sound Stereo Receiver/Natural Sound Compact Disc Player Récepteur Stéréo/Lecteur Compact Disque L R OWNER'S MANUAL MODE D'EMPLOI SAFETY INSTRUCTIONS 6A CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 7 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 8 9 10 11 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. [. . . ] Continue pressing PRESET/TUNING / to select the group of the preset stations (A, B, C, D, and E). To recall a preset station Press TUNER and select the desired number by pressing PRESET/BAND and PRESET/TUNING / on the front panel or PRESET / , A/B/C/D/E and 1-8 on the remote control. SLEEP A REP D PEAK B RNDM TIME C DISP PROG E TAPE A/B/C/D/E PRESET STEREO TUNED MEMORY 1~8 4 Press MEMORY. · "MEMORY", "PRESET", and preset number will appear on the display. MD VOLUME TAPE AUX CD TUNER The arrow will appear for a second when it is preset. MD REC TUNER PRESET TAPE REC PRESET TAPE PRESET STEREO TUNED MEMORY MODE DUBBING START E-10 USING THE BUILT-IN TIMER Setting the clock You must set the clock before you use the timer functions. The clock is based on a 24-hour system for Australia and General models, and 12-hour system for US, Canada, and General models. DISPLAY HOUR MIN Adjusting the brightness of the display You can adjust the brightness of the display. If you have connected the CD player (CDX-E100), cassette deck (KX-E100), and/or MD recorder (MDX-E100) to this unit, the brightness of the displays is automatically adjusted to that of this unit. DISPLAY English NATURAL SOUND STEREO RECEIVER RX-E100 VOLUME DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN MAX NATURAL SOUND STEREO RECEIVER RX-E100 TIME ADJ STANDBY/ON PHONES TIMER BASS HOUR TREBLE MIN BALANCE INPUT VOLUME - + - + L R DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN MAX TIME ADJ STANDBY/ON PHONES TIMER BASS HOUR TREBLE MIN BALANCE INPUT TIME ADJ PRESET/BAND - + - + L R 1 2 While the power is on, press DISPLAY to display the time. While holding TIME ADJ, press HOUR to set the hour. · If you want to move the time in the reverse direction, press HOUR while holding TIME ADJ and PRESET/ BAND. INPUT Press and hold DISPLAY for about two seconds so that "Dimmer ±0" appears on the display. While holding DISPLAY, turn INPUT clockwise to increase or counterclockwise to decrease brightness. 3 While holding TIME ADJ, press MIN to set the minutes. · If you want to move the time in the reverse direction, press MIN while holding TIME ADJ and PRESET/ BAND. Control Range: ±0 to ­6 (Preset value: ±0) To display the clock Press DISPLAY. The current time appears for about 8 seconds, then the normal display returns. Note · In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock. E-11 USING THE BUILT-IN TIMER Before using the timer If you want to use the cassette deck, KX-E100 or the MD Recorder, MDX-E100 for timer play or recording, you must first make the connections as shown in "Connecting the system" on page 5. For details, refer to the instructions supplied with the MDX-E100 or KX-E100. 3. Timer REC Select the recording component by turning INPUT. If you like to enjoy timer play with TUNER or AUX, select "REC Mode OFF". (Example) Timer play and recording By using the built-in timer, you can have the unit turn on at a specified time and begin playing or recording automatically. You can also specify the turn off time. DISPLAY NATURAL SOUND STEREO RECEIVER RX-E100 4. ON Time "ON Time" appears on the display for a second, and changed to the time setting mode. Press MIN to set the minute. MIN VOLUME 5. OFF Time Set the time the same way as above. If you set the ON time but not OFF time, the timer play or recording will finish automatically after an hour. MAX DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN TIME ADJ STANDBY/ON PHONES TIMER BASS HOUR TREBLE MIN BALANCE INPUT Notes + + L R TIMER HOUR INPUT · The display mode will change in about 8 seconds. If the mode is changed before the setting is completed, call the mode again by pressing DISPLAY once or more. · If you select the input other than TUNER and AUX on "2. Timer REC" is skipped. 1 Press DISPLAY. Whenever DISPLAY is pressed, the display mode changes as follows: 1. Clock Time (TIMER on/off mode) If you have not set the clock yet "Set Clock" appears. You need to set the current time as described on page 11. 2 Press TIMER to complete the timer setting. The system is put in the standby mode. · The STANDBY and TIMER indicators light up. If you continue using the system, press STANDBY/ ON to turn on this unit. To cancel the timer play setting 2. [. . . ] and Europe models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 230 V, 50 Hz [General model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 110/120/220/240 V, 50/60 Hz Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 W Dimensions (W x H x D) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]