User manual YAMAHA RX-E600

[. . . ] RX-E600 Receiver Récepteur OWNER'S MANUAL MODE D'EMPLOI IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 12 13 WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 14 1 2 3 4 5 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. [. . . ] Connect the SYSTEM CONNECTOR (DVD) of the RX-E600 and the SYSTEM CONNECTOR (RECEIVER) of the DVD-E600 with a system control cable (supplied with the DVD-E600). *The other SYSTEM CONNECTOR of the RX-E600 is for connecting the MDX-E300 or KX-E300. Connect the AC power plug of the DVD-E600 to AC OUTLET of the RX-E600. This configuration allows you to turn all components in the system on and off with one touch, and reduces the standby power consumption of the DVD-E600. <RX-E600> C IN MD OUT To wall outlet DVD FM ANT 75 UNBAL. SYSTEM CONNECTOR D A IN R GND AM ANT L TAPE OUT B E IN + ­ SUBWOOFER OUT SYSTEM CONNECTOR DVD IN AUX R L TUNER 6 MIN. /SPEAKER SPEAKERS 1 Audio pin cable SYSTEM CONNECTOR * RECEIVER 2 System control cable <DVD-E600> 3 To RX-E600 VIDEO OUT Y VIDEO DIGITAL OUT AUDIO OUT L R S VIDEO PR PB COAXIAL OPTICAL E COMPONENT Adding KX-E300 and MDX-E300 to the above system (For details, refer to the owner's manual supplied with the respective component. ) 1 2 3 4 Connect Å and i of RX-E600 to Å and i of KX-E300. Connect Ç and Î of RX-E600 to Ç and Î of MDX-E300. Connect an external component to the AUX terminal of RX-E600. Connect DIGITAL OPTICAL OUT of DVD-E600 to DIGITAL OPTICAL IN of MDX-E300. Take off the covers of the optical fiber cable plug, the DIGITAL OPTICAL OUT jack, and the DIGITAL OPTICAL IN jack before making digital connections. Be sure to replace the terminal's cover when the terminal on the rear panel is not being used, in order to protect from dust. Caution · Do not turn RX-E600 on until all connections between components have been completed. · Do not connect or disconnect the system control cable and/or power cord while the system components are turned on. 5 GETTING STARTED Setting the clock You must set the clock before you use the timer functions. The clock is based on a 12-hour system for U. S. and Canada models, and 24-hour system for Australia model. STANDBY/ON DISPLAY HOUR MIN VOLUME NATURAL SOUND STEREO RECEIVER RX­E600 STANDBY/ON TIMER DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN MAX TIMER ADJ BASS PHONES TIMER TREBLE HOUR BALANCE MIN INPUT ­ + ­ + L R TIME ADJ PRESET/BAND 1 2 3 4 Turn on the power by pressing STANDBY/ON on the front panel, or POWER on the remote control. While the power is on, press DISPLAY to display the time. Press HOUR while holding TIME ADJ to advance the hour setting. · Press HOUR while holding TIME ADJ and PRESET/BAND to reverse the hour setting. Press MIN while holding TIME ADJ to advance the minute setting. · Press MIN while holding TIME ADJ and PRESET/BAND to reverse the minute setting. To display the clock Press DISPLAY. The current time appears for about 8 seconds, then the normal display returns. Some buttons and controls may not work while the current time is displayed. Note · In the event of a power failure or when the AC power cord is disconnected for more than five minutes, you must reset the clock. 6 NAMES OF BUTTONS AND CONTROLS Front panel 12 3 45 67 8 NATURAL SOUND STEREO RECEIVER RX­E600 English 9 VOLUME STANDBY/ON TIMER DISPLAY MEMORY AUTO/MAN'L PRESET/BAND PRESET/TUNING MIN MAX TIMER ADJ BASS PHONES TIMER TREBLE HOUR BALANCE MIN INPUT ­ + ­ + L R 0q 1 STANDBY/ON (P. 9) 2 TIMER indicator (P. 12) 3 DISPLAY (P. 12) 4 MEMORY/TIME ADJ (P. 6/P. 11) 5 AUTO/MAN'L/TIMER (P. 10/P. 12) 6 PRESET/BAND (P. 10) 7 Display (P. 7) 8 PRESET/TUNING / (P. 10) HOUR/MIN (P. 6/P. 12) w e r t 9 VOLUME (P. 9) 0 PHONES (P. 9) q Remote control sensor (P. 3) w BASS (P. 9) e TREBLE (P. 9) r BALANCE (P. 9) t INPUT (P. 9) Display PRESET STEREO AUTO TUNED MEMORY TIMER SLEEP 1 2 345 6 7 8 1 Multi-information display 2 PRESET indicator (P. 11) 3 STEREO indicator (P. 10) 4 TUNED indicator (P. 10) 5 AUTO indicator (P. 10) 6 MEMORY indicator (P. 11) 7 TIMER indicator (P. 12) 8 SLEEP indicator (P. 13) 7 NAMES OF BUTTONS AND CONTROLS Remote control POWER 1 1 1 4 4 7 7 0 2 2 5 5 8 8 +10 3 3 6 6 9 2 +100 REP RANDOM B PROG C TIME E 3 A D 1 POWER (P. 9) 2 Preset numbers (P. 11) 3 A/B/C/D/E (P. 11) 4 PRESET / (P. 11) 5 TUNER (RX-E600) (P. 11) 6 MD input (MDX-E300) (P. 15) 7 TAPE input (KX-E300) (P. 15) 8 DVD input (DVD-E600) (P. 14) 9 AUX (The equipment connected to the AUX terminal) (P. 5) 0 SLEEP (P. 13) q DISPLAY (P. 12) w VOLUME %/fi (P. 9) Note · 5 - 9 are operation buttons and input selectors for each component. TAPE DIRECTION PRESET TUNER PRESET 5 7 8 9 4 6 MD DVD TAPE AUX MD REC/PAUSE TAPE REC/PAUSE MODE DUBBING START 0 SLEEP DISPLAY q w VOLUME 8 BASIC OPERATIONS Listening to a source STANDBY/ON TREBLE VOLUME 1 2 Set the volume to "MIN" by turning VOLUME. Turn on the power by pressing STANDBY/ON on the front panel, or POWER on the remote control. [. . . ] 0. 43 V/330 English General Power supply [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and Europe models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]