User manual YAMAHA RX-V2065

[. . . ] U RX-V2065 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS 7 CAUTION 8 RISK OF ELECTRIC SHOCK DO NOT OPEN 9 CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 10 11 12 13 14 1 2 3 4 5 6 Read these instructions. Clean only with dry cloth. Do not block any ventilation openings. [. . . ] Zone2 Zone2 + Zone3 Presence None Note · When setting "Extra Speaker Assignment" to "Zone2" or "Presence", surround back channel signals for main unit are separately output from other channels. · When setting "Extra Speaker Assignment" to "Zone2 + Zone3", surround and surround back channel signals for main unit are separately output from other channels. Assigns the SP1 terminals for Zone2 speakers and disables the SP2 terminals. Assigns the SP1 terminals for Zone2 speakers and SP2 terminals for Zone3 speakers. Assigns the SP1 terminals for presence speakers and disables the SP2 terminals. Disables the EXTRA SP (SP1/SP2) terminals. · If "LFE / Bass Out" is set to "Front", "Front Speaker" automatically switches to "Large" even when it is set to "Small". Center Speaker Choices: None, Small*, Large Sets the size of center speaker. None Select this when no center speaker is connected. Center channel signals are spread to front left and right speakers. Select this when a small center speaker is connected. Low-frequency components of center channel are output from a subwoofer. If a subwoofer is not connected they are output from front speakers. Select this when a large center speaker is connected. None, Small*, Large Small Large LFE / Bass Out Choices: Subwoofer, Front, Both* Selects speaker(s) for outputting low-frequency components of the LFE (low-frequency effect sound) channel or other channels. LFE channel signals Parameter Subwoofer Front Both Subwoofer Output Not output Output Front speakers Not output Output Not output Other speakers Not output Not output Not output Surround Speaker Choices: Sets sizes of left and right surround speakers. None Select this when no surround speakers are connected. Surround channel signals are spread to front left and right speakers. "Surround Back Speaker" automatically switches to "None" when this is selected. Select this when small surround speakers are connected. Low-frequency components of surround channels are output from a subwoofer. If a subwoofer is not connected they are output from front speakers. Select this when large surround speakers are connected. Small Low-frequency components of other channel signals Large Parameter Subwoofer Front Both [1] [2] [3] Subwoofer [1] Not output [3] Front speakers [2] [3] [4] Other speakers [2] [2] [2] y · When "None" is selected, the sound field programs automatically enter the Virtual CINEMA DSP mode. Surround Back Speaker Choices: None, Large x 1, Small x 1, Large x 2, Small x 2* Sets sizes of left and right surround back speakers. Outputs low-frequency components of the channel of speaker, the size of which is set to "Small". Outputs low-frequency components when the sizes of speakers are set to "Large". Outputs low-frequency components of the front left and right channels and the channel of speaker, the size of which is set to "Small". Outputs low-frequency components of the front left and right channels. None [4] Large x 1 Small x 1 Large x 2 Small x 2 Front Speaker Choices: Small, Large* Sets the sizes of front left and right speakers. [. . . ] The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft. com). Copyright remains Eric Young's, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. [. . . ]