User manual YAMAHA RX-V393

[. . . ] UCA RXV493 RXV393 Natural Sound AV Receiver Récepteur audiovisuel "Son Naturel" Thank you for selecting this YAMAHA AV receiver. Nous vous remercions d'avoir porté votre choix sur ce récepteur audiovisuel YAMAHA. OWNER'S MANUAL MODE D'EMPLOI SAFETY INSTRUCTIONS 7 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Wall or Ceiling Mounting ­ The unit should be mounted to a wall or ceiling only as recommended by the manufacturer. Ventilation ­ The unit should be situated so that its location or position does not interfere with its proper ventilation. For example, the unit should not be situated on a bed, sofa, rug, or similar surface, that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings. [. . . ] If multipath interference is detected, the indication decreases. 7 MEMORY indicator When the MEMORY button is pressed, this indicator flashes for about 5 seconds. During this period, the displayed station can be programmed to the memory by using the A/B/C/D/E button and the preset station number selector buttons. 8 AUTO indicator Lights up when this unit is in the automatic tuning mode. 9 TAPE MON indicator Lights up when the tape deck (or MD recorder etc. ) is selected as the input source by pressing the TAPE/MD MONITOR (MON) button. 4 SLEEP indicator Lights up while the built-in SLEEP timer is functioning. 5 Center channel mode indicators The name of a selected center channel mode lights up only when a program which uses the Dolby Pro Logic Surround decoder is selected. 0 DSP program indicators The name of a selected DSP program lights up when the builtin digital sound field processor and/or the Dolby Pro Logic Surround decoder is on. 6 EFFECT OFF indicator Lights up if neither the digital sound field processor nor the Dolby Pro Logic Surround decoder is on. In this state, sound output is 2-channel stereo. 19 REMOTE CONTROL TRANSMITTER The remote control transmitter provided with this unit is designed to control all the most commonly used functions of this unit. If the CD player and tape deck connected to this unit are YAMAHA components designed for remote control compatibility, then this remote control transmitter will also control various functions of each component. RX-V493 9 1 ­ TIME/ LEVEL DELAY/CENTER + /REAR/SWFR TEST RX-V393 9 1 ­ DELAY TIME + PROGRAM TEST EFFECT PROLOGIC ENHANCED ON/OFF EFFECT PROGRAM PROLOGIC ENHANCED ON/OFF 8 7 8 7 VCR TV/DBS DVD/LD 2CH /6CH VCR VIDEO 2CH /6CH DIR A DIR B REC/PAUSE PLAY DIR A DIR B REC/PAUSE PLAY 1 2 2 POWER /I A/B TAPE 1 6 2 2 POWER /I A/B TAPE ­ PRESET + A/B/C/D/E TUNER ­ PRESET + A/B/C/D/E TUNER 6 DISC PLAY CD DISC PLAY CD PHONO PHONO VOLUME VOLUME 3 4 SLEEP 3 5 4 SLEEP 5 20 English For Control of This Unit 7 Program selector keys PROGRAM: When the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder) is on, this key changes the currently selected DSP program whenever the right or left side of this key is pressed. PROLOGIC: Directly selects the ENHANCED: Directly selects the 1 DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/­ keys RX-V493 only Adjust the delay time (DELAY), the center channel output level (CENTER), the rear channel output level (REAR) and the output level to the SUBWOOFER OUTPUT terminal (SWFR). Select the item which you want to adjust by pressing the DELAY/CENTER/REAR/SWFR key and adjust its time or level by pressing the TIME/LEVEL +/­ key. (For details, refer to page 28, 35 and 36. ) DELAY TIME +/­ key RX-V393 only Adjusts the delay time, or the time difference between the begining of source sound and the begining of effect sound. (For details, refer to page 36. ) PRO LOGIC program. PRO LOGIC ENHANCED program. 8 EFFECT ON/OFF key Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround decoder). 9 TEST key Used for speaker balance adjustment. (For details, refer to page 22­24. ) 2 Tuner keys Controls tuner. +: Selects higher preset station number. ­: Selects lower preset station number. A/B/C/D/E: Selects the group (A ­ E) of preset station numbers. For Other Component Control Identify the remote control transmitter keys with your component's keys. If these keys are identical, their functions will be the same. On each key function, refer to the corresponding instruction on your component's manual. 3 SLEEP timer key This key is used to turn the built-in SLEEP timer on and off, and to set the SLEEP time. (For details, refer to page 37. ) 4 POWER /I key Turns the power to this unit on and turns this unit into the standby mode alternately. 5 VOLUME +/­ keys Turns the volume level up/down. 6 Input selector keys Selects input source. RX-V493 only When the TV/DBS or DVD/LD input source is selected, pressing the same key (TV/DBS or DVD/LD) switches the input signals between 2 channel stereo signals and 6 channel discrete signals. When switched to "6ch", discrete signals from the unit connected to the 6CH DISCRETE INPUT DVD/LD TV/DBS terminals of this unit are selected as the input signals. RX-V393 only When the VIDEO input source is selected, pressing the same key (VIDEO) switches the input signals between 2 channel stereo signals and 6 channel discrete signals. When switched to "6ch", discrete signals from the unit connected to the 6CH DISCRETE INPUT VIDEO terminals of this unit are selected as the input signals. 1 Tape deck keys Controls tape deck. * DIR A, B and A/B are applicable only to double cassette tape deck. [. . . ] Turn the power to this unit on. The sound is degraded when listening with the headphones connected to the compact disc player or cassette deck that are connected with this unit. 38 Others This unit is in the standby mode. English SPECIFICATIONS AUDIO SECTION Minimum RMS Output Power per Channel Main L, R 8 ohms, 20 Hz to 20 kHz, 0. 04% THD Power Band Width <RX-V493> <RX-V393> RIAA Equalization Deviation PHONO MM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0±0. 5 dB Total Harmonic Distortion (20 Hz to 20 kHz) 8 ohms, 30W, 0. 1% THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz to 50 kHz 8 ohms, 25W, 0. 1% THD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Hz to 50 kHz <RX-V493> <RX-V493> <RX-V393>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50W+50W Center 8 ohms, 1 kHz, 0. 04% THD [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70W+70W [Europe, Australia, China and General models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65W+65W Damping Factor (SPEAKERS A) 8 ohms, 20 Hz to 20 kHz . . . . . . . . . . . . . . . 80 or more Input Sensitivity/Impedance <RX-V393> PHONO MM to REC OUT 1V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 02% CD/TAPE·MD/DVD·LD/TV·DBS/VCR to SP OUT 30W/8 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 03% PHONO MM to REC OUT 1V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 02% CD/TAPE·MD/VIDEO/VCR to SP OUT 30W/8 ohms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 03% <RX-V493> <RX-V493> [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70W [Europe, Australia, China and General models]. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65W <RX-V393> . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50W Rear L, R 8 ohms, 1 kHz, 0. 04% THD . . . . . . . . . . 20W+20W Maximum Power [China and General models only] 8 ohms, 1 kHz, 10% THD Main L, R <RX-V393> PHONO MM . . . . . . . . . . . . . . . . . . . 2. 5 mV/47 k-ohms CD/TAPE·MD/DVD·LD/TV·DBS/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mV/47 k-ohms 6CH DISCRETE INPUT MAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mV/56 k-ohms CENTER. . . . . . . . . . . . . . . . . . . . . 150 mV/40 k-ohms SURROUND. . . . . . . . . . . . . . . 100 mV/40 k-ohms SUBWOOFER . . . . . . . . . . . . 150 mV/40 k-ohms PHONO MM . . . . . . . . . . . . . . . . . . . 2. 5 mV/47 k-ohms CD/TAPE·MD/VIDEO/VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mV/47 k-ohms 6CH DISCRETE INPUT MAIN. . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mV/56 k-ohms CENTER. . . . . . . . . . . . . . . . . . . . . 150 mV/11 k-ohms SURROUND. . . . . . . . . . . . . . . 100 mV/11 k-ohms SUBWOOFER . . . . . . . . . . . . 150 mV/40 k-ohms Signal-to-Noise Ratio (IHF-A Network) <RX-V493> <RX-V393> PHONO MM to REC OUT (5 mV Input Shorted). . . . . . . . . . . . . . . . . . . . . . . . . . 80 dB CD/TAPE·MD/DVD·LD/TV·DBS/VCR to SP OUT (Shorted). . . . . . . . . . . . . . . . . . . . . . . . . . 93 dB PHONO MM to REC OUT (5 mV Input Shorted). . . . . . . . . . . . . . . . . . . . . . . . . . 80 dB CD/TAPE·MD/VIDEO/VCR to SP OUT (Shorted) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 dB <RX-V493>. . . . . . . . . . . . . . . . . . . . . . . . 100W+100W <RX-V393>. . . . . . . . . . . . . . . . . . . . . . . . . . . . 75W+75W <RX-V493>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100W <RX-V393>. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75W Center Residual Noise (IHF-A Network) MAIN L/R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140 µV Channel Separation (Vol. ­30 dB, EFFECT OFF) Rear L, R. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30W+30W Dynamic Power per Channel (by IHF Dynamic Headroom measuring method) Maximum Input Signal <RX-V493> <RX-V493> <RX-V393> 8/6/4/2 ohms [U. S. A. [. . . ]