User manual YAMAHA RX-V550

[. . . ] G RX-V550 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING GEBRUIKSAANWIJZING CAUTION: READ THIS BEFORE OPERATING YOUR UNIT. 1 To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. Install this sound system in a well ventilated, cool, dry, clean place -- away from direct sunlight, heat sources, vibration, dust, moisture, and/or cold. Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. [. . . ] If other characters are used for RT data, they are displayed with under-bars. CT (Clock Time) mode: The current time is displayed and updated every minute. If the data are accidentally cut off, "CT WAIT" may appear. EON (Enhanced Other Networks): See "EON function" on the following page. English 39 TUNING PTY SEEK function If you select the desired program type, this unit automatically searches all preset RDS stations that are broadcasting a program of the required type. (U. K. and Europe models) RDS MODE/FREQ EON 2 Press PRESET/TUNING l / h (or PRESET/ CH u / d on the remote control) to select the desired program type. The selected program type appears in the front panel display. l PRESET/TUNING h LEVEL VOLUME PTY SEEK MODE START Front panel or PRESET/CH VIDEO AUX PRESET/TUNING FM/AM A/B/C/D/E l PRESET/TUNING h MEMORY TUNING MODE EDIT NEXT LEVEL MAN'L/AUTO FM AUTO/MAN'L MONO PROGRAM INPUT POP M PHONES SPEAKERS A B STANDBY /ON EFFECT STRAIGHT TONE CONTROL INPUT MODE MULTI CH INPUT SILENT CINEMA VIDEO L AUDIO R SELECT 2 EFFECT LEVEL TITLE PRESET/CH SET MENU MENU A/B/C/D/E SELECT TEST RETURN DISPLAY 1 3 Remote control 2 1, 3 REC AUDIO DISC SKIP 3 FREQ/RDS MODE PTY SEEK START EON Press PTY SEEK START to begin searching all preset RDS stations. The selected program type flashes and the PTY HOLD indicator lights up in the front panel display while searching for stations. PTY SEEK MODE START y When performing this operation with the remote control, first press TUNER to set the remote to tuner mode. Front panel or PTY HOLD 1 Press PTY SEEK MODE to set this unit in the PTY SEEK mode. The program type of the station being received or "NEWS" flashes in the front panel display. PTY SEEK MODE START Lights up MODE PTY SEEK START Remote control Front panel or Flashes · The unit stops searching when it finds a station broadcasting the selected type of program. · If the found station is not the one you desire, press PTY SEEK START again. This unit resumes searching for another station broadcasting the same type of program. MODE PTY SEEK START To cancel this function Press PTY SEEK MODE twice. Remote control 40 TUNING EON function This function uses the EON data service on the RDS station network. If you select the desired program type (NEWS, INFO, AFFAIRS or SPORT), this unit automatically searches for all preset RDS stations that are scheduled to broadcast the selected type of program and switches from the station currently being received to the new station when the broadcast starts. Note This function can only be used when an RDS station that offers the EON data service is being received. When such a station is being received, the EON indicator lights up in the front panel display. 1 Check that the EON indicator is lit in the front panel display. If the EON indicator is not lit up, tune into another RDS station so that the EON indicator lights up. BASIC OPERATION Press EON repeatedly to select the desired program type (NEWS, INFO, AFFAIRS or SPORT). The selected program type name appears in the front panel display. RDS MODE/FREQ EON 2 Front panel or EON Remote control · If a preset RDS station type starts broadcasting the selected type of program, the unit automatically switches from the program being received to that program. (EON indicator flashes. ) · When broadcasting of the selected program ends, the unit returns to the previous station (or another program on the same station). To cancel this function Press EON repeatedly until no program type name is shown in the front panel display. English 41 RECORDING RECORDING Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. (U. S. A. model) Notes · When this unit is set in the standby mode, you cannot record between other components connected to this unit. · The setting of TONE CONTROL, VOLUME, "SP LEVEL" (page 51) and the sound field programs does not affect recorded material. · A source connected to the MULTI CH INPUT jacks of this unit cannot be recorded. · S-Video and composite video signals pass independently through this unit's video circuits. Therefore, when recording or dubbing video signals, if your video source component is connected to provide only an S-Video (or only a composite video) signal, you can record only an S-Video (or only a composite video) signal to your VCR. [. . . ] and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 120 V, 60 Hz [Australia model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 240 V, 50 Hz [China model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 220 V, 50 Hz [Korea model] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]