User manual YAMAHA RX-V563

[. . . ] U RX-V563 AV Receiver OWNER'S MANUAL IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS 10 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 11 · Explanation of Graphical Symbols 12 The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 13 1 2 3 4 5 6 7 8 9 Read Instructions ­ All the safety and operating instructions should be read before the product is operated. Retain Instructions ­ The safety and operating instructions should be retained for future reference. [. . . ] · Pairing requires operations on this unit and on the other component with which Bluetooth communications are to be established. If necessary, refer to the other component's operating instructions. Note If the Bluetooth adapter is not connected to the DOCK terminal of this unit, "No BT adapter" appears in the front panel display. 4 Check that the Bluetooth component detects the Bluetooth adapter. If the Bluetooth component detects the Bluetooth adapter, "YBA-10 YAMAHA" (example) appears in the Bluetooth device list. BASIC OPERATION Select the Bluetooth adapter in the Bluetooth device list and then enter the pass key "0000" on the Bluetooth component. When the pairing procedure is successful, "Completed" appears in the front panel display. 5 There are two pairing methods: pairing by using "START PAIRING" in "SET MENU" and quick pairing. Pairing by using "SET MENU" Use this feature to perform pairing with the video monitor. Select "START PAIRING" in "INPUT MENU". See page 75 for details. Note The Yamaha Bluetooth adapter can be paired with up to eight Bluetooth components. When pairing is conducted successfully with a ninth component and the pairing data is registered, the pairing data for the least recently used other component is cleared. Quick pairing To ensure security, a time limit of 8 minutes is set for the pairing operation. You are recommended to read and fully understand all the instructions before starting. Playback of the BluetoothTM component 1 Press R INPUT l / h repeatedly (or press 4 V-AUX/DOCK) to select "V-AUX" as the input source. Start playback of your Bluetooth component. When the connected Bluetooth adapter detects the Bluetooth component, "BT connected" and the DOCK indicator appears in the front panel display. 1 Press R INPUT l / h repeatedly (or press 4 V-AUX/DOCK) to select "V-AUX" as the input source. 2 2 3 Turn on the Bluetooth component you want to pair with. Press and hold EBAND (or 7 BAND) for 3 seconds to start pairing. Once the Bluetooth adapter starts pairing, "Searching. . . " appears for a moment. While the Bluetooth adapter is in the pairing mode, DOCK indicator flashes in the front panel display. y To cancel the pairing, press EBAND (or 7 BAND) again. y · When you press 8 ENTER, the connected Bluetooth adapter searches and connect to the last connected Bluetooth component. If the Bluetooth adapter cannot find the Bluetooth component, "Not found" appears in the front panel display. · To disconnect the Bluetooth adapter from the Bluetooth component, press 9 RETURN. English 61 En RECORDING Recording Recording adjustments and other operations are performed from the recording components. Refer to the operating instructions for those components. Notes · When this unit is set to the standby mode, you cannot record between other components connected to this unit. · TONE CONTROL (see page 43) and VOLUME settings, speaker levels (see page 43) and the sound field programs (see page 40) do not affect recorded material. · The source connected to the MULTI CH INPUT jacks of this unit cannot be recorded. · The XM Satellite Radio signals cannot be output at the AUDIO OUT (REC) jacks. [. . . ] 27 WIRING/LEVEL, Auto setup . . . . . . . . . . . . . 27 100 En Index X XM ANTENNA, XM Radio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 XM Mini-Tuner Dock . . . . . . . . . . . . . . . . . . . . . . . . . . 48 XM Radio antenna, XM Radio setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]