User manual YAMAHA RX-V870

[. . . ] RX-V 070/870 1 Natural Sound Stereo Receiver Thank you for selecting this YAMAHA stereo receiver. OWNER'S MANUAL CAUTION CONTENTS Safety Instructions . . . . . . . . . . . . . . . . . . . 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Profile of This Unit . . . . . . . . . . . . . . . . . . . 6 Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] ou 1 Select the reception band (FM or AM) while watching the display. ou AM FM AM FM 2 AUTO/MAN'L MONO AUTO 2 kHZ FM MHz AUTO/MAN'L MONO "AUTO TUNING" goes off. 3 3 Tune to the desired station manually. To tune to a higher frequency, press the right side once. To tune to a lower frequency, press the left side once. * To continue tuning search, press and hold the button. 4 If the station where tuning search stopped is not the desired one, follow step 3 again. Note If you tune to a FM station manually, it is received in monaural mode automatically to increase the signal quality. * If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method. Display information 1 2 STEREO 3 Displays the band and frequency of the received station. Illuminates when an FM stereo broadcast with sufficient Indicates the signal level of the received station. signal strength is received. FM MHz 0 40 60 80 100 17 PRESET TUNING This unit can store station frequencies (selected by tuning operation) by using preset station buttons. With this function, you can select any desired station simply by pressing the corresponding preset station button. Up to 40 stations (8 stations per page) can be programmed. Illustrations: RX-V1070 Parts in shaded areas ( ) are not present on RX-V870. 4, 2 (Preset station buttons) 2, 1 3 To program stations To recall a preset station 1 2 Tune to the desired station. (Refer to the previous page for tuning procedures. ) Select the desired page (A ­ E) of preset station buttons while watching the display. A/B/C/D/E PRESET 1 Select the page of preset station buttons. A/B/C/D/E PRESET AUTO FM AUTO FM 2 3 MEMORY STEREO MHz 40 0 CONCERT HALL 60 80 100 MEMORY Flashes for about 5 seconds. Select the desired preset station button. Notes q A new setting can be programmed in place of the former one. q For presets, the setting of the reception mode (stereo or monaural) is stored along with the station frequency. Memory back-up The memory back-up circuit prevents the programmed data from being lost even if the POWER switch is turned off or the power plug is disconnected from the AC outlet or the power is cut due to temporary power failure. If, however, the power is cut for more than two weeks, the memory may be erased. If so, it can be re-programmed simply by following the PRESET TUNING steps. 4 Press a preset station button before "MEMORY" goes off from the display. PRESET AUTO STEREO FM MHz 40 0 CONCERT HALL 60 80 100 Shows the displayed station has been programmed to A1. * In the same way, program other stations to A2, A3 . . . * You can program more stations to the preset station buttons on other pages in the same way by selecting other pages in step 2. 18 USING DIGITAL SOUND FIELD PROCESSOR (DSP) This unit incorporates a sophisticated, multi-program digital sound field processor, which allows you to expand and shape the audio sound field from both the audio and video sources, for a theater-like experience in the listening/viewing room. This digital sound field processor has 8 programs; 4 programs for audio sources and 4 programs for Audio/Video sources. You can create an excellent audio sound field by selecting the suitable program and adding desired adjustments. In addition, when the digital sound field program is in the DOLBY PRO LOGIC, ENHANCED or 70 mm MOVIE THEATER mode, the built-in automatic input balance control functions. This presents you the best surround condition without manual adjustment. Selects center mode. (For details, refer to page 13. ) Displays your selection on the DSP or other informations. Digital sound field program selector DELAY FCR ms NORMAL WIDE PHANTOM PRESET AUTO STEREO AM FM ROCK CONCERT JAZZ CLUB kHZ MHz CHURCH 70 mm TV SLEEP PRO LOGIC ENHANCED MOVIE THEATER THEATER 40 0 CONCERT HALL 60 80 100 MEMORY Used to adjust the delay time. (For details, refer to page 22. ) Used to adjust sound output level of each speaker. [. . . ] The distance between the two remote control transmitters is too long or too short. The signal coding or modulation of the other remote control transmitter is not compatible with this remote control transmitter. The internal microcomputer "freezes". Further learning is not possible without deleting unnecessary commands. Press the RESET button on the remote control transmitter. [. . . ]