User manual YAMAHA RX-17

[. . . ] 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign objects may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. [. . . ] 2. 5kHz 6. 3kHz 16kHz 0dB 0dB 0dB [ ]/[ ]: UP/DOWN [p]/[[]: Adjust [ [ y Press 3 k / n to select a frequency band and 3 l / h to adjust the selected frequency band. Note The "GEQ" parameter can be adjusted only when "GEQ" is selected in "EQ TYPE SELECT". [p]/[[]: Select [ENTER]: Enter Choice AUTO PEQ GEQ Functions Uses the parametric equalizer adjusted in "AUTO SETUP" (see page 37). Adjusts the built-in 7-frequency band graphic equalizer so that the tonal quality of the speakers matches. Press 3 ENTER to display the graphic equalizer screen. Deactivates the equalizing feature. Test tone TEST Use this feature to make adjustments of "GEQ" while listening to a test tone. To select "TEST", press 3k / n repeatedly in the graphic equalizer screen. A)EQUALIZER 1/2 p . TEST >OFF ON CHANNEL;;;;FRONT L 0dB 0dB 0dB 0dB OFF 63Hz 160Hz 400Hz 1kHz [ ]/[ ]: UP/DOWN [p]/[[]: Select [ y Currently applied parametric equalizer type (see page 40) appears under "AUTO PEQ". Choice OFF Functions Does not output test tones and output the currently selected source component. Outputs test tones from the selected speakers. Note You can select "AUTO PEQ" only when you carry out "AUTO SETUP" in advance (see page 37). In this case, "AUTO PEQ" is automatically selected as the default setting. ON 82 En p p Customizing this unit (MANUAL SETUP) Low-frequency effect level B)LFE LEVEL Use this feature to adjust the output level of the LFE (lowfrequency effect) channel according to the capacity of your subwoofer or headphones. The LFE channel carries low-frequency special effects which are only added to certain scenes. Plays back Dolby Digital or DTS signals in 6. 1/ 7. 1 channels using the Pro Logic IIx music decoder. Plays back Dolby Digital or DTS signals in 6. 1/ 7. 1 channels using the Dolby Digital EX or DTS-ES decoder. Plays back Dolby Digital or DTS signals in 6. 1/ 7. 1 channels using the Dolby Digital EX decoder. Does not use any decoders to create 6. 1/7. 1 channels. PLIIxMovie PLIIxMusic EX/ES EX OFF Tone bypass TONE BYPASS Use this feature to select whether the audio output bypasses the tone control circuitry when "TREBLE" and "BASS" are set to 0 dB (see page 52). Choice AUTO Functions Automatically bypasses the tone control circuitry to provide the purest signal possible when "TREBLE" and "BASS" are set to 0 dB. Does not bypass the tone control circuitry. OFF Manual delay MANUAL DELAY Use this feature to adjust the delay of the sound output manually to synchronize audio with video images when you set "HDMI AUTO" to "OFF". Control range: 0 to 240 ms Control step: 1 ms 84 En p . HDMI AUTO;;;;;;OFF [ ]/[ ]: UP/DOWN [p]/[[]: Select Customizing this unit (MANUAL SETUP) HDMI set F)HDMI SET Use this feature to select the component to play back HDMI audio signals. F)HDMI SET SUPPORT AUDIO RX-17 4 INPUT MENU Use this menu to adjust the parameters of each input source. 4 INPUT MENU 1/2 4 INPUT MENU 2/2 . A) [p]/[[]: Select [ENTER]: Return TUNER B) MULTI CH C) PHONO D) CD E) CD-R F) MD/TAPE G) BD/HD DVD [ ]/[ ]: UP/DOWN [ENTER]: Enter . H) I) J) K) L) M) DVD DTV/CBL DVR VCR V-AUX DOCK [ ]/[ ]: UP/DOWN [ENTER]: Enter [ p [ Support audio SUPPORT AUDIO Use this feature to select whether to play back HDMI audio signals on this unit or on another HDMI component connected to the HDMI OUT jack on the rear panel of this unit. Choice RX-17 Functions Plays back HDMI audio signals on this unit. The HDMI audio signals input at the HDMI input jacks of this unit are not output to the HDMI component connected to the HDMI OUT jack on the rear panel of this unit. Plays back HDMI audio signals on another HDMI component connected to the HDMI OUT jack. Input source A)TUNER B)MULTI CH Parameter INPUT RENAME VOL. [. . . ] (3) Misuse, including but not limited to (a) failure to use the product for its normal purpose or in accordance with Yamaha's instructions on the proper use, maintenance and storage, and (b) installation or use of the product in a manner inconsistent with the technical or safety standards in force in the country where it is used. (4) Accidents, lightning, water, fire, improper ventilation, battery leakage or any cause beyond Yamaha's control. (5) Defects of the system into which this product is incorporated and/or incompatibility with third party products. (6) Use of a product imported into the EEA and/or Switzerland, not by Yamaha, where that product does not conform to the technical or safety standards of the country of use and/or to the standard specification of a product sold by Yamaha in the EEA and/or Switzerland. [. . . ]