User manual YAMAHA RX-21E

[. . . ] Heed Warnings ­ All warnings on the product and in the operating instructions should be adhered to. Follow Instructions ­ All operating and use instructions should be followed. Cleaning ­ Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. [. . . ] The name of the selected program appears on the front panel display. HALL JAZZ CLUB ROCK CONCERT ENTERTAINMENT 1 MUSIC VIDEO 2 TV THEATER 3 4 MOVIE MOVIE THEATER 1 THEATER 2 5 /DTS SUR. 6 NIGHT 7 6. 1/5. 1 8 STEREO 9 0 +10 ENTER EFFECT · There are 9 programs with sub-programs available with this unit. However, the selection depends on the input signal format and not all sub-programs can be used with all input signal formats. · You cannot use the digital sound field processor with a source connected to the 6CH INPUT jacks of this unit or when the unit is reproducing a digital source with a sampling frequency greater than 48 kHz. · The acoustics of your listening room affect the DSP program. Minimize the sound reflections in your room to maximize the effect created by the program. · When you select an input source, this unit automatically selects the last DSP program used with that source. · When you set this unit in standby mode, it stores the current source and DSP program in memory and automatically selects them when you turn on the power again. · If the unit receives a Dolby Digital or DTS signal when the input mode is set to AUTO, the DSP program (No. 7­9) automatically switches to the appropriate decoding program. · When the unit is reproducing a monaural source with PRO LOGIC or PRO LOGIC/Enhanced, or PRO LOGIC II Movie, no sound is output from the main and rear speakers. Sound can only be heard from the center speaker. In this case turn on the sound effect. Note · This unit is not set in the virtual CINEMA DSP mode even if "1C REAR LR" is set to NON in the following cases: ­ when the 6ch Stereo, DOLBY DIGITAL, Pro Logic, Pro Logic II, or DTS program is selected; ­ when the sound effect is turned off; ­ when 6CH INPUT is selected as the input source; ­ when a digital signal with a sampling frequency greater than 48 kHz is input to this unit; ­ when using the test tone; or ­ when connecting the headphones. y · During stereo reproduction, you can display information such as the type, format and sampling frequency of the signal input from the components connected to this unit. (While playing a source) I SILENT CINEMA DSP You can enjoy a powerful sound field similar to what you could expect from actual speakers through headphones, with SILENT CINEMA DSP. You can listen to SILENT CINEMA DSP by connecting your headphones to the PHONES jack while the digital sound field processor is on. The "SILENT" indicator lights up on the front panel display. (When sound effects are off, the unit reproduces the source in normal stereo. ) 1 2 Press AMP. Press d to display the information about the input signal. PRESET/CH BASIC OPERATION ­ SELECT + Notes · This feature is not available when 6CH INPUT is selected or the unit is receiving a digital signal with a sampling frequency greater than 48 kHz. · The sound from the LFE channel will be mixed and output from the headphones. I Normal stereo reproduction Press STEREO/EFFECT to turn off the sound effect for normal stereo reproduction. Press STEREO/EFFECT again to turn the sound effect back on. STEREO STEREO or EFFECT ENTER EFFECT Front panel Remote control (Format): The display shows the signal format. When the unit cannot detect a digital signal it automatically switches to analog input. in: The display shows the number of input signal source channels, as follows: For multi-channel soundtrack such as front 3 channels, rear 2 channels and LFE, the display shows "3/2/ LFE". For bilingual broadcasts where the signal is split into 2 channels, the display shows "1+1". For signals with more than 3 channels the display shows "MLT". [. . . ] 20 Hz to 15 kHz +0. 5, ­2 dB AM SECTION · Tuning Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530/531 to 1710/1611 kHz · Usable Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 µV/m GENERAL · Power Supply [U. S. A. and Canada models] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]