User manual YAMAHA RX-5E

[. . . ] Allow ventilation space of at least 30 cm on the top, 20 cm on the left and right, and 20 cm on the back of this unit. 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. A room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. [. . . ] The operations of your iPod can be done with the aid of the front panel display (menu browse mode) or without it (simple remote mode). When you connect your iPod to this unit, you can perform the following operations with the remote control. Key ENTER k n n l h w f a b r s e p p Function Subsequent menu Menu up Menu down Previous menu Subsequent menu Search backward (Press and hold) Search forward (Press and hold) Skip forward Skip backward Stop Pause (Menu browse mode) Play/Pause (Simple remote mode) Play (Menu browse mode) Play/Pause (Simple remote mode) Switch between Menu browse mode and Simple remote mode When you select menu browse mode, the front panel display changes as follows. You can change information screens on the front panel display using CINFO (or iINFO) (see page 23). You can directly operate your iPod while it is connected to this unit. You can use a special playback function such as shuffle playback and repeat playback by setting the option menu. The option menu can be displayed only in menu browse mode. Press pDISPLAY to switch to menu browse mode before starting shuffle or repeat playback. The following playback styles are available depending on the playback function selected. Shuffle: Plays back songs or albums in random order (Choices: Off, Songs, Albums). ⷠSelect "Off" if you do not want to play back in random order. The following menu items are provided for each input source. You can also use nRETURN to return to the previous screen or close the OPTION menu. When nCursor or other keys do not work after completing the menu, select the input source again using gInput selection keys. The default settings are marked with "*. Reduces any change in volume when switching input sources by correcting volume differences between input sources. You can set this parameter for each input source. You can change items to be displayed using nCursor k / n. For example, if input signal channels are 3 front channels, 2 surrounds and LFE, "3/2/ 0. If a channel that cannot be expressed as the above, a total number of channels such as "5. 1-channel when surround back speakers are used. Auto Automatically selects the most suitable decoder according to whether a flag for reproducing surround back channel is present, and reproduces the signals in 6. [. . . ] This unit does not play back the audio commentaries of the Blu-ray Disc or HD DVD contents. Video signals This unit is compatible with the video signals of the following resolutions: · When a TV that supports the HDMI control function is connected with this unit via the HDMI connection, the following operations of this unit can be controlled with the TV remote control (except for some TVs). Switching the sound output between a TV and this unit. If you connect this unit to an HDMI control-compatible DVD player or Blu-ray Disc player via HDMI, you can also control the connected component in synchronization with this unit (except some models). [. . . ]