User manual YAMAHA RX-7

[. . . ] 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in a environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. [. . . ] INI E)USB PLAY STYLE Signal information SIGNAL INFO Use this feature to check audio signal information (see page 35). Using SET MENU Use the remote control to access and adjust each parameter. y You can change the "SET MENU" parameters while this unit is reproducing sound. 3 Press G ENTER to enter "MANUAL SETUP". The "MANUAL SETUP" display appears in the OSD. ;MANUAL SETUP . 1 SOUND MENU 2 INPUT MENU 3 OPTION MENU 1 Press D AMP and then press Q MENU to enter "SET MENU". The top "SET MENU" display appears in the OSD. SET MENU TOPAMENU . ;AUTO SETUP . A;MANUAL SETUP ;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter [ ]/[ ]:Up/Down [ENTER]:Enter 4 2 Press G k / n to select "MANUAL SETUP". SET MENU TOPAMENU ;AUTO SETUP . A;MANUAL SETUP ;SIGNAL INFO [ ]/[ ]:Up/Down [ENTER]:Enter Press G k / n / l / h and G ENTER to select and change the parameter. · Press G k / n to select the desired menu or parameter. · Press G l / h to change the parameter value. · Press G ENTER to enter the selected menu or to confirm the parameter. · Press H RETURN to return to the previous menu level. Press Q MENU to exit from "SET MENU". p p p p 5 p p 50 En SET MENU 1 SOUND MENU Use this menu to manually adjust any speaker settings or compensate for video signal processing delays. ;MANUAL SETUP 1 SOUND MENU . Choices: SWFR, FRONT, BOTH 1 SOUND MENU A)SPEAKER SET LFE/BASS OUT A)SPEAKER SET CROSSOVER FREQ;;;80Hz Subwoofer phase SUBWOOFER PHASE Use this feature to switch the phase of your subwoofer if bass sounds are lacking or unclear. Choices: NORMAL, REVERSE 1 SOUND MENU A)SPEAKER SET SUBWOOFER PHASE >NORMAL REVERSE SWFR FRONT>BOTH · Select "NORMAL" if you do not want to reverse the phase of your subwoofer. · Select "REVERSE" to reverse the phase of your subwoofer. When a subwoofer is connected to this unit and you want to get natural bass sound Select "SWFR" (subwoofer). The LFE signals as well as the low-frequency signals of other speakers set to "SML" (or "SMALL") are directed to the subwoofer. When a subwoofer is connected to this unit and you want to get rich bass sound Select "BOTH" (both). The low-frequency signals of any source are output from the subwoofer. The LFE signals as well as the low-frequency signals of other speakers set to "SML" (or "SMALL") are directed to the subwoofer. The low-frequency signals of the front left and right channels are directed to the front left and right speakers and the subwoofer regardless of the "FRONT SP" setting (see page 51). When you do not use a subwoofer Select "FRONT" (front). The LFE signals, the lowfrequency signals of the front left and right channels, and the low-frequency signals of other speakers set to "SML" (or "SMALL") are all directed to the front left and right speakers regardless of the "FRONT SP" setting (see page 51). 52 En SET MENU Speaker level B)SP LEVEL Use this feature to manually adjust the output level of each speaker. Control range: ­10 to +10 dB Control step: 1 dB Initial setting: 0 dB 1 SOUND MENU B)SP LEVEL 1/2 -__________+ FL FR C [ ]/[ ]:Up/Down [p]/[[]:Adjust Speaker distance C)SP DISTANCE Use this feature to manually adjust the distance of each speaker and the delay applied to the respective channel. [. . . ] The following are excluded from this guarantee: a. Periodic maintenance and repair or replacement of parts due to normal wear and tear. Damage resulting from: (1) Repairs performed by the customer himself or by an unauthorised third party. (2) Inadequate packaging or mishandling, when the product is in transit from the customer. [. . . ]