User manual YAMAHA RX-8E

[. . . ] 3 Locate this unit away from other electrical appliances, motors, or transformers to avoid humming sounds. 4 Do not expose this unit to sudden temperature changes from cold to hot, and do not locate this unit in an environment with high humidity (i. e. a room with a humidifier) to prevent condensation inside this unit, which may cause an electrical shock, fire, damage to this unit, and/or personal injury. 5 Avoid installing this unit where foreign object may fall onto this unit and/or this unit may be exposed to liquid dripping or splashing. [. . . ] THX processing for any multi-channel source. 2-channel sources are decoded by the PRO LOGIC, PRO LOGIC II, PRO LOGIC IIx or DTS Neo:6 decoder before THX processing. MULTI 2-CH MOVIE THEATER: Sci-Fi MOVIE THEATER: Adventure MOVIE THEATER: General THX: THX Cinema English 49 SOUND FIELD PROGRAM DESCRIPTIONS Program Features THX processing for Dolby Digital and Dolby Digital EX sources. This program is available only when surround back L/R speakers are connected to this unit and when the input source contains surround back channel signals. THX processing for DTS-ES sources. Sources THX: THX Surr. EX THX: dts ES + THX DOLBY DIGITAL: SUR. ENHANCED q Standard 5. 1 channel processing for Dolby Digital sources. CINEMA DSP enhanced processing for Dolby Digital sources. D+PLIIxMovie: SUR. STANDARD Standard 7. 1 channel processing for Dolby Digital sources. q CINEMA DSP enhanced 7. 1 channel processing for Dolby Digital sources. Standard 6. 1 channel processing for Dolby Digital sources. CINEMA DSP enhanced 6. 1 channel processing (Dolby Digital EX) for Dolby Digital sources. Standard 5. 1 channel processing for DTS sources. CINEMA DSP enhanced processing for DTS and 96 kHz/24-bit DTS sources. MULTI Standard 5. 1 channel processing for 96 kHz/24-bit DTS sources. Standard 7. 1 channel processing (Dolby Pro Logic IIx) for DTS sources. CINEMA DSP enhanced 7. 1 channel processing (Dolby Pro Logic IIx) for DTS sources. Standard 6. 1 channel processing (Dolby Digital EX) for DTS sources. CINEMA DSP enhanced 6. 1 channel processing (Dolby Digital EX) for DTS sources. Standard 6. 1 channel processing (DTS-ES Matrix) for DTS sources. CINEMA DSP enhanced processing (DTS-ES Matrix) for DTS and 96 kHz/24-bit DTS sources. Standard 6. 1 channel processing (DTS-ES Discrete) for DTS sources. CINEMA DSP enhanced processing (DTS-ES Discrete) for DTS sources. Standard 6. 1 channel processing (DTS-ES Matrix) for 96 kHz/24-bit DTS sources. 50 SOUND FIELD PROGRAM DESCRIPTIONS Program Features Standard processing for Dolby Surround sources. Sources PRO LOGIC: SUR. ENHANCED PRO LOGIC IIx: PLIIx Movie PRO LOGIC II: PLII Movie PRO LOGIC IIx: PLIIx Game PRO LOGIC II: PLII Game DTS: Neo:6 Cinema CINEMA DSP enhanced precessing for Dolby Surround sources. Dolby Pro Logic IIx processing for movie software. * Dolby Pro Logic II processing for movie software. * 2-CH Dolby Pro Logic IIx processing for game software. * Dolby Pro Logic II processing for game software. * DTS processing for movie software. * You can select either Pro Logic IIx or Pro Logic II processing using the PLII/PLIIx parameter on page 88. SOUND FIELD PROGRAMS English 51 SOUND FIELD PROGRAM DESCRIPTIONS For music sources You can select from the following sound fields when playing music sources, like CD, FM/AM broadcasting, tapes, etc. Program Features HiFi DSP processing. A classic shoe-box type concert hall with approximately 1700 seats. Each time you press SLEEP, the front panel display changes as shown below. The SLEEP indicator flashes while switching the amount of time for the sleep timer. SLEEP 120 min. SLEEP OFF SLEEP SLEEP 90 min. P08 Sci-Fi SLEEP 30 min. SLEEP 60 min. ADVANCED OPERATION . DSP LEVEL;;;;0dB P. INIT DLY;;16ms P. ROOM SIZE;;1. 0 S. INIT DLY;;20ms S. ROOM SIZE;;1. 0 P08 MOVIE THEATER Sci-Fi V­AUX DVR/VCR2 VCR 1 CBL/SAT SP A DTV DVD MD/TAPE CD­R CD TUNER PHONO dB VOLUME SLEEP SLEEP 120min L R Full display Short display Notes · The OSD signal is not output to the REC OUT jack, and will not be recorded. · When the component video signals are input, short display is not output to the COMPONENT VIDEO MONITOR OUT jacks. · You can set the OSD to turn on (gray background) or off when a video source is not being reproduced (or the source component is turned off) by using DISPLAY SET (see page 65). The SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program. V­AUX DVR/VCR2 VCR 1 CBL/SAT SP A DTV DVD MD/TAPE CD­R CD TUNER PHONO dB VOLUME L R SLEEP CONCERT HALL English 53 ADVANCED OPERATIONS Canceling the sleep timer Press SLEEP repeatedly until "SLEEP OFF" appears in the front panel display. After a few seconds, "SLEEP OFF" disappears, and the SLEEP indicator goes off. SLEEP Manually adjusting speaker levels You can adjust the output level of each speaker while listening to a music source. This is also possible when playing sources through the MULTI CH INPUT jacks. Please note that this operation will override the level adjustments made in "AUTO SETUP" (page 26), "Speaker level" (page 60) and "Using the test tone" (page 55). AMP y The sleep timer setting can also be canceled by pressing STANDBY on the remote control (or STANDBY/ON on the front panel) to set this unit to the standby mode. + TV VOL + CH + SOURCE VOL ­ TV MUTE ­ A/B/C/D/E ­ MUTE SET MENU TV 1 TV INPUT 2 LEVEL TITLE PURE DIRECT MENU NIGHT ENTER AUDIO TEST ON SCREEN STRAIGHT RETURN DISPLAY EFFECT 3 1 2 Set AMP/SOURCE/TV to AMP. Press LEVEL repeatedly to select the speaker you want to adjust. [. . . ] 87. 50 to 108. 00 MHz · Usable Sensitivity (IHF) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1. 0 µV (11. 2 dBf) · Signal to Noise Ratio (IHF) Mono/Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 dB/70 dB · Harmonic Distortion (1 kHz) Mono/Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0. 2%/0. 3% · Stereo Separation (1 kHz) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]