Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA S08E3. We hope that this YAMAHA S08E3 user guide will be useful to you.
Lastmanuals help download the user guide YAMAHA S08E3.
Detailed instructions for use are in the User's Guide.
[. . . ] This product may also use "household" type batteries. Make sure that the battery being charged is a rechargeable type and that the charger is intended for the battery being charged. When installing batteries, do not mix batteries with new, or with batteries of a different type. Mismatches or incorrect installation may result in overheating and battery case rupture.
WARNING:
Do not place this product in a position where anyone could walk on, trip over , or roll anything over power or connecting cords of any kind. [. . . ] Use the [] and [+] buttons to select the desired destination Part (1 - 16).
CpyVar (Copy Variation Effect)
When Var Connect is set to "SYS, " this lets you copy the Effect settings for the Voice assigned to the Current Part. When Var Connect is set to "INS, " this lets you copy the Variation Effect settings for the Voice assigned to the Part for which "Var Send" (PAGE 24 in Multi Part Edit) was set to "on. " If all of the Parts' Var Send settings are "off, " the Part having the Voice Effect settings to be copied can be selected, just as above (when Var Connect is set to "SYS").
Var Connect=SYS Var Connect=INS
desired destination Part (1 - 16)
source Part
Settings: P1 ~ P16 (Part 1 ~ 16)
Saving Data to an External Device (Bulk Dump)
Reference Appendix
You can send all the parameter settings for the current Multi or all Multis to your computer or some other external MIDI device using Bulk Dump.
CpyVar
PAGE PART ELEM KEY PAGE
CpyVar
PART ELEM KEY
PAGE
PART ELEM KEY
3
BlkDmp AllUs
2
P
1
2
Settings: P1 ~ P16 (Part 1 ~ 16) (When Var Connect is set to "SYS, " or when Var Connect is set to "INS" and all Parts' Var Send settings are "off. ") No Parameter (When Var Connect is set to "INS" and one Part's Var Send settings is "on. ") n The following parameters can be copied. · Variation Effect Type · Variation Parameters · MW Variation Effect Control Depth · AC1 Variation Effect Control Depth n When you copy the Variation effect data of a Drum Voice, the 2 Band EQ effect settings are copied.
n In order to perform a Bulk Dump, the appropriate MIDI Device Number must be set. n For an application example showing how to use the Bulk Dump function, see page 36. n The parameters below can not be transmitted. · Seq/Tempo (SEQ PLAY) · Device No (UTILITY) · Sync (UTILITY) · SeqCtl (UTILITY)
Select parameter type to be transmitted
Display Curnt (current) Voice Job mode Whole currently selected Voice data Multi Job mode Whole currently selected Multi data
CpyCtl (Copy Controller)
This let you copy the Controller settings for the Voice assigned to the Part.
AllUs (Voice)/All (Multi) Systm (System)
All User Voices (Normal 1 to 128, Drum 1 and 2) All Multis (1~32) System data (Utility/Controller)
n When receiving All User Voice as bulk data, the loaded voice data isn't actually active until a Voice is selected. n After receiving the current voice as bulk data, the voice will be lost if you select another Voice or Mode. To avoid losing the data, you should use Voice Store to store your received data (page 50).
CpyCtl
PAGE PART ELEM KEY
3
P
1
Settings: 1 ~ 16, A (All Parts) n The following parameters can be copied. · MW Filter Control · MW LFO Pitch Modulation Depth · MW LFO Filter Modulation Depth · MW LFO Amplitude Modulation Depth · Pitch Bend Range · AC1 Filter Control · AC1 LFO Filter Modulation Depth · AC1 LFO Amplitude Modulation Depth · Portamento Switch · Portamento Time
Using the Jobs
49
Quick Guide
Multi
PAGE
PART ELEM KEY
4
P
CpyPart 1 P 02
Basics Section
2 Destination Element/Drum Key Set the Element/Drum Key of the Voice that is to be the destination for the copy.
CpyPart (Copy Part)
Saving the Settings (Store)
You can store (save) your original parameter settings for up to 128 Normal Voices, 2 Drum Voices and 32 Multis to User Memory. The procedure is as follows.
When you perform this, the settings for the destination Voice will be overwritten. Important data should always be backed up to computer, Yamaha MIDI Data Filer MDF3 or some other storage device. With the included software "Card Filer, " you can convert Standard MIDI file on your computer from format 1 to format 0. Never attempt to remove/insert the Memory Card in the SEQ PLAY mode.
Step, chained playback is stopped and you are returned to the first Chain Step. If you select "stop, " the Song stops when it reaches this Chain Step.
Settings: skip, end, stop, song file
1 Press the [SEQ PLAY] button to enter the Sequence Play mode.
PAGE PART ELEM KEY
Song1 /110
Setting the Chain
You can set up to 100 Steps in a Chain here. Each Chain Step is assigned a Song file. You can play back one particular Chain Step or multiple Chain Steps endto-end. Chain Step Number Change each Chain Step by using the [ ]/ [ ] buttons. If you choose a Step Number here, the screen for the selected Chain Step will be displayed.
Chain Step Number Song File
3 Use the [DEC/NO] and [INC/YES] buttons to assign the song file or skip/end/stop to the chain step, then press the [ENTER] button to specify it. 4 Repeat steps 2 and 3 above to set up the chain.
1 Select a Song file you wish to play back, in the same manner as you did 1 to 3 above.
n When playing back a single Song, you do not need to select a Chain Step Number (You can have any Chain Step screen open).
PAGE
PART ELEM KEY
SongFile Seq
2 Set the tempo (if necessary). 3 Press the [PLAY/STOP] button to playback the Song.
Settings: 00 ~ 99 n You can jump to the next Chain Step screen and change the Chain settings in advance, even while a Song is being played back. n When a Song is being played back, a [P] indicator appears in the PART/ELEM/KEY column of the Chain Play screen for the current Song.
4 Press the [PLAY/STOP] button again to stop the Song playback.
Chained Playback 1 Use the [ ] and [ ] buttons to select the Chain Step Number of the first Song you wish to play back. 3 Press the [PLAY/STOP] button to play back the Song. [. . . ] De C. V. , Departamento de ventas Javier Rojo Gomez No. 1149, Col. Tel: 686-00-33
KOREA
Yamaha Music Korea Ltd. 16F 23-8 Yoido-dong, Youngdungpo-ku, Seoul, Korea Tel: 02-3770-0661
SWEDEN
Yamaha Scandinavia AB J. Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00
MALAYSIA
Yamaha Music Malaysia, Sdn. , Bhd. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA S08E3
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA S08E3 will begin.