Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA S115IIIA. We hope that this YAMAHA S115IIIA user guide will be useful to you.
Lastmanuals help download the user guide YAMAHA S115IIIA.
Detailed instructions for use are in the User's Guide.
[. . . ] Place only one speaker on each speaker stand. Tighten fastening screws securely. Remove the speakers from the stands before moving the stands or adjusting their height. Add weight such as sand bags around the stand legs to prevent them from falling over. [. . . ] If you experience any hearing loss or ringing in the ears, consult a physician. · Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. · Always turn AC power to the power amplifier on last in any audio system to avoid speaker damage. When turning power off, the power amplifier should be turned off first for the same reason.
2
This product, when used in combination with amplification and/or additional loudspeakers, may be capable of producing sound levels that could cause permanent hearing loss. DO NOT operate at high volume levels or at a level that is uncomfortable. If you experience any discomfort or ringing in the ears, or suspect an hearing loss, you should consult an audiologist.
All full-range loudspeakers are fitted with a self-resetting poly switch that protects the high-frequency driver from damage caused by excessive power. If a loudspeaker cabinet loses high-frequency output, immediately remove power from the unit and wait for two to three minutes. They should allow the poly switch to reset. Reapply power and check the performance of the high-frequency driver before continuing with the power reduced to a level that does not cause the poly switch to interrupt the signal. On the SW115V/SW118V/SW218V sub woofer, the Poly Switch protects the woofer and a similar routine should be followed if its output is lost. The high voltage levels produced can damage the PN90. · Use the PN90 with a load impedance of between 7. 5 and 30k. (Rated load impedance is 15k) · The polarity of the LOW signal is inverted at the crossover point between the LOW and HIGH signals. Compensate for this by reversing the polarity when connecting the power amplifier output jacks to a subwoofer. Note that you must reverse the polarity between the power amplifier and subwoofers rather than between the PN90 and power amplifier to prevent damage to the connected device. · The PN90's connectors are unbalanced phone jacks. Use shielded audio cable with phone plugs to connect to the PN90. · Adjust the level of the LOW and HIGH signals using the power amplifier volume controls.
5
Specifications
Model Enclosure Speaker Unit LF HF SM10V 10" cone 1" V. C. driver 70Hz-20kHz 125W 250W 500W S115IIIA 12" cone 60Hz-16kHz 175W 350W 700W SM12V S115V Bass reflex type SM15V S215V 15" cone × 2 42Hz-16kHz 500W 1000W 2000W 4 99dB (1W, 1m) 90° 40° 1. 5kHz 15" cone 2" V. C. driver 55Hz-16kHz 250W 500W 1000W
Frequency Response Power Capacity NOISE* PGM MAX
Nominal Impedance 8 Sensitivity 96dB SPL (1W, 1m) 97dB SPL (1W, 1m) 99dB SPL (1W, 1m) Nominal Dispersion Horizontal 40° 90° 40° 90° 40° Vertical 60° 40° 90° 40° 90° Crossover Frequency 1. 8kHz 2kHz 1. 7kHz Input Connectors 1/4" phone jack × 2, SPEAKON Neutrik NL4MP × 2 Dimensions (W×H×D) 560×353×277 420 × 632 × 333 632 × 414 × 351 489 × 719 × 377 719 × 483 × 343 495 × 1167 × 597 Weight 13. 4kg 20. 8kg 21. 4kg 29. 4kg 28. 0kg 47. 2kg
S115IIIA/S115V
SM10V/SM12V/SM15V
S215V
Model Enclosure Speaker Unit Frequency Response Power Capacity
SW115V 15" cone 35Hz-2kHz 250W 500W 1000W 8 95dB SPL (1W, 1m)
NOISE* PGM MAX
SW118V Bass reflex type 18" cone 30Hz-2kHz 300W 600W 1200W
SW218V 18" cone × 2 30Hz-2kHz 600W 1200W 2400W 4 98dB SPL (1W, 1m)
Nominal Impedance Sensitivity Recommended Crossover Frequency Input Connectors Dimensions (W×H×D) Weight
96dB SPL (1W, 1m) 90Hz, 12dB/oct. 1/4" phone jack × 2, SPEAKON Neutrik NL4MP × 2 506 × 611 × 532 610 × 728 × 641 1221 × 578 × 659 28. 2kg 39. 0kg 65. 4kg
Specifications and descriptions in this owner's manual are for information purposes only. [. . . ] Lot 8, Jalan Perbandaran, 47301 Kelana Jaya, Petaling Jaya, Selangor, Malaysia Tel: 3-78030900
SPAIN/PORTUGAL
Yamaha-Hazen Música, S. A. 17, 200, 28230 Las Rozas (Madrid), Spain Tel: 91-639-8888
SINGAPORE
Yamaha Music Asia Pte. , Ltd. No. 11 Ubi Road 1, No. 06-02, Meiban Industrial Building, Singapore Tel: 747-4374
BRAZIL
Yamaha Musical do Brasil LTDA. Rebouças 2636, São Paulo, Brasil Tel: 011-3085-1377
SWEDEN
Yamaha Scandinavia AB J. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA S115IIIA
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA S115IIIA will begin.