User manual YAMAHA SPX2000

[. . . ] Owner's Manual Keep This Manual For Future Reference. E PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING * Please keep this manual in a safe place for future reference. WARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards. These precautions include, but are not limited to, the following: Power supply/Power cord · Only use the voltage specified as correct for the device. The required voltage is printed on the name plate of the device. · Use only the supplied power cord. [. . . ] If you select INPUT, the effect sound will change according to the input signal. If you select MIDI, the modulated sound will change according to the received MIDI messages (velocity). If you want the effect to vary according to your keyboard performance, select MIDI. Higher settings of this value will cause the delay time to follow the SOURCE more faithfully. With lower settings, the delay time will follow more loosely. This affects the delay time when a control signal is not being received. Amount of feedback for the modulated sound. Raising this value will increase the amount of feedback, emphasizing the modulation. Negative (­) settings will invert the phase of the feedback. Fine parameters Parameter name MIX BAL. DECAY*a Range 0--100% 0--100% UP, DOWN 44. 1 kHz: 6 ms--46. 0 s 48 kHz: 5 ms--42. 3 s 88. 2 kHz: 3 ms--23. 0 s 96 kHz: 3 ms--21. 1 s ­12. 0--+12. 0 dB 21. 2 Hz--8. 00 kHz ­12. 0--+12. 0 dB 100 Hz--8. 00 kHz 10. 0--0. 10 ­12. 0--+12. 0 dB 50. 0 Hz--16. 0 kHz Explanation Decay time of the flanger. This indicates the time from when the SOURCE signal is received and the delay time changes until it returns to its original position. Higher settings of this parameter will make the delay time return more slowly. This adjusts the volume of the low-frequency region. Positive (+) settings will boost the low-frequency region, and negative (­) settings will attenuate it. The LSH G gain applies to the frequency region below this setting. This adjusts the gain of the frequency region specified by EQ F. Positive (+) settings will boost the region, and negative (­) settings will attenuate it. Frequency of the equalizer (peaking type). The EQ G gain setting will affect the region around this frequency. Q (sharpness) of the equalizer (peaking type). This indicates the sharpness of the equalizer frequency response curve. Higher values will produce a sharper curve. [. . . ] Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. 135 Milner Avenue, Scarborough, Ontario, M1S 3R1, Canada Tel: 416-298-1311 BELGIUM/LUXEMBOURG Yamaha Music Central Europe GmbH, Branch Belgium Rue de Geneve (Genevastraat) 10, 1140 - Brussels, Belgium Tel: 02-726 6032 ASIA THE PEOPLE'S REPUBLIC OF CHINA Yamaha Music & Electronics (China) Co. , Ltd. 25/F. , United Plaza, 1468 Nanjing Road (West), Jingan, Shanghai, China Tel: 021-6247-2211 U. S. A. Yamaha Corporation of America 6600 Orangethorpe Ave. , Buena Park, Calif. Tel: 714-522-9011 FRANCE Yamaha Musique France BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 INDONESIA PT. [. . . ]