User manual YAMAHA SV-250

[. . . ] SV250/SV255 Owner's Manual Congratulations! Thank you for purchasing the Yamaha Silent ViolinTM. In order to obtain the maximum performance and enjoyment from your Silent ViolinTM, we urge you to read this Owner's Manual thoroughly before using the instrument. Please keep this Owner's Manual in a safe place for later reference. SV250/255 Features The SV250/SV255 Silent ViolinTM is a high quality electric violin designed for stage and studio use. Based on the same slim body design found in previous Silent ViolinsTM, the SV250/255 incorporates a unique hollow structure in its body to deliver enhanced acoustic tone and excellent playability. [. . . ] [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] These symbols are only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol (bottom two symbol examples): This symbol might be used in combination with a chemical symbol. * Pass the cable end through the holes on the supplied cable band then attach to the shoulder rest as shown in the diagram on the right to prevent accidental disconnecting of the cable. Caution · Disconnecting the cable while the power is ON may result in damage to the equipment. The sudden shock to your ears may be severe, so please use caution. · When connecting or disconnecting the cable, always make sure that the control box is not connected to any external device, or that the power is switched OFF on the external device before proceeding. The resulting loud sound may cause hearing loss and damage external equipment. · When connecting or disconnecting the cable, always make sure there are no inner earphones or headphones, etc. , connected. The loud sound may cause hearing loss and damage the inner earphones or headphones. <On the Control Box> w Instrument Jack ( ) Cable This jack supplies power to the SV250/SV255 instrument and receives the audio signal from the SV250/ SV255. Use the supplied cable to connect the instrument to the "Instrument Jack" on the Control Box. * The control box's main power is switched ON when a cable is connected to this jack. * Hooking the cable onto the cable hook positioned furthest away from the instrument jack prevents accidental disconnection of the cable. Caution Cable Hook · Always disconnect the cable when the instrument is not in use. The instrument continuously consumes electric power when the cable is connected. · When connecting or disconnecting the cable, always make sure that the control box is not connected to any external device, or that the power is switched OFF on the external device before proceeding. The resulting loud sound may cause hearing loss and damage external equipment. · When connecting or disconnecting the cable, always make sure there are no inner earphones or headphones, etc. , connected. The loud sound may cause hearing loss and damage the inner earphones or headphones. · Never connect any devices (including other Silent ViolinsTM with different model numbers) other than the SV250/SV255 Silent ViolinTM that is included in the bundled set. Doing so may result in damage to the other device. 7 e Phones Jack ( ) For connecting the supplied inner earphones. * The headphone amp's power is switched ON when a pair of stereo inner earphones is connected to this jack. * The volume level for the stereo inner earphones can be adjusted with the !0 PHONES VOLUME control adjacent to the PHONES jack. Since the !0 PHONES VOLUME is not linked to the MAIN VOLUME control, its level can be adjusted independently of the LINE OUT. * Any commercially available headphones or inner earphones can be used. Caution · Always disconnect the headphones or inner earphones from the jack when the instrument is not being used. [. . . ] · Ensure that the bridge stands vertically. If it leans to one side, use both hands to adjust. Make sure that each string passes over the corresponding slits in the bridge. Bridge seat Bridge feet [Make sure the bridge feet do not come in contact with the bridge seat] Bad Correct Bad Vertical Body Bridge seat Tailpiece [Bridge is placed vertically] 12 Make sure that the strings are resting in their appropriate grooves in the bridge when playing the instrument. Strings may come out of their grooves when adjusting the bridge or changing strings. [. . . ]