User manual YAMAHA SW1000XG

[. . . ] PCI AUDIO MIDI CARD O W N E R' S M AN UA L FCC INFORMATION (U. S. A. ) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. [. . . ] In addition, you can change the tone of the input, and have fun with unique effects like chorus effects and voice change effects. You can edit the harmony effects with the VH Effect Editor that is included on the CD-ROM that came with your sound card. PLG100-DX This XG Plug-In Board is equipped with a 16 polyphony FM tone generator that works just like the well-known Yamaha DX7. This board lets you feature the flashy sounds of an FM tone generator in your song. You can enjoy creating the FM tone generator sounds on your computer screen using the DX Easy Editor and DX Simulator that are included on the CD-ROM that came with your sound card. 24 Supplementary Items for XGworks 2. 0 The XGworks for SW1000XG software that is included in this package has been specially tailored to work with the SW1000XG. For that reason, you will find here an introduction to some functions and some supplementary information not included in the XGworks 2. 0 Owner's Manual that came with your sound card. n XGworks 2. 0 Ouner's Manual is provided as a PDF file in the supplied CD-ROM's "Document" folder. Simultaneous Playback of Multiple Wave Tracks and Playback Part-Way Through Data from multiple wave tracks can be sent to the SW1000XG audio parts (maximum 12 parts) and played back simultaneously with effects applied to each part individually. Also, playback of the wave tracks can be started midway in the song. n Song files (. xws files) containing wave tracks cannot be fast forwarded using the XGworks Play Control. Even if the mouse button is held down over the FWD button, the song will be forwarded at normal playback speed. System Setup Dialog The functions and items below have been added to the System Setup dialog. n The System Setup dialog is opened by clicking on [Setup] on the menu bar, then selecting [System Setup] from the pull-down menu. For details, see page 210 of the XGworks V2. 0 Owner's Manual. Device Page of the System Setup Dialog The number of Wave Out settings has been increased to six. A maximum of six output devices using wave data can be specified. 25 Device Selection When using the SW1000XG sound card, select the devices as follows: ·MIDI In Select "SW1000 MIDI IN. " When you are going to connect an external MIDI keyboard to the sound card's MINI DIN 6 pin terminal using the included MIDI adapter cable, you can have the keyboard performance play through the SW1000XG sound card (you must select "SW1000 #1 (or #2) Synthesizer" for MIDI Thru and MIDI Out, as mentioned below). ·MIDI Thru Select "SW1000 #1 (or #2) Synthesizer". The MIDI signal that comes in through the MIDI In device above will be played through the SW1000XG sound card. If "SW1000 MIDI OUT" is selected, and you have connected an external MIDI tone generator to the sound card's MINI DIN 6 pin terminal using the included MIDI adapter cable, you can play the music through that tone generator. n "SW1000 #1 Synthesizer" is the MIDI output device for Part numbers 1 to 16. "SW1000 #2 Synthesizer" is the MIDI output device for Part numbers 17 to 32. ·MIDI Out Select "SW1000 #1 (or #2) Synthesizer". The MIDI signal (performance data) that is output from XGworks will be played through the SW1000XG sound card. If "SW1000 MIDI OUT" is selected, and you have connected an external MIDI tone generator to the sound card's MINI DIN 6 pin terminal using the included MIDI adapter cable, you can play the music through that tone generator. n "SW1000 #1 Synthesizer" is the MIDI output device for Part numbers 1 to 16. "SW1000 #2 Synthesizer" is the MIDI output device for Part numbers 17 to 32. ·Wave In Select "SW1000 #1 (or #2) WAVE IN". "SW1000 #1 WAVE IN" is a wave input device specially for the SW1000XG sound card external audio input (A/D input). n When effects are applied to the A/D input audio signal, those effects are ignored. Even when recorded on a XGworks wave track, only the raw sound is recorded. "SW1000 #2 WAVE IN" is the wave input device for all sound heard using the SW1000XG sound card (the mixture of A/D input, XGworks wave tracks, and the sound from the AWM2 tone generator on the sound card). n Unlike "SW1000 #1 WAVE IN", the effect component will be input if effects are applied. ·Wave Out Select "SW1000 #1 - #6 WAVE OUT". Correspondence between each wave out device (#1 - #6) and SW1000XG audio part is as follows: SW1000 #1 WAVE OUT: SW1000 #2 WAVE OUT: SW1000 #3 WAVE OUT: SW1000 #4 WAVE OUT: SW1000 #5 WAVE OUT: SW1000 #6 WAVE OUT: Wave Wave Wave Wave Wave Wave output is sent to the SW1000XG audio parts PCI 1 output is sent to the SW1000XG audio parts PCI 3 output is sent to the SW1000XG audio parts PCI 5 output is sent to the SW1000XG audio parts PCI 7 output is sent to the SW1000XG audio parts PCI 9 output is sent to the SW1000XG audio parts PCI 11 and PCI 2. and PCI 12. PCI is the SW1000XG sound card's audio part which receives wave output from the XGworks wave track. There are total of 12 PCI parts and the mixing between these PCI parts can be controlled by using the SW1000XG mixer ( P. 32). 26 MIDI Out Filter Page on the System Setup Dialog The Realtime Message item has been added. [. . . ] Wettergrens Gata 1 Box 30053 S-400 43 Gsteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRAZIL Yamaha Musical do Brasil LTDA. Rebou·as 2636, S<o Paulo, Brasil Tel: 011-853-1377 PHILIPPINES Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 ARGENTINA Yamaha Music Argentina S. A. [. . . ]