User manual YAMAHA SY77E2

[. . . ] 4 Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Tuning and Changing the Strings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 The Shoulder Rest . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The string may suddenly break resulting in eye or other unexpected injuries. G 4th string Groove D A E 1st string Logo imprint [Looking from the tailpiece] Bridge seat Bridge feet [Make sure the bridge feet do not come in contact with the bridge seat] Correct · The lower side of the bridge supports the 1st string (E), the higher side supports the 4th string (G). Make sure the bridge is placed properly, then set the bridge in the bridge seat. The side of the bridge with the logo imprint should face the tailpiece. · Ensure that the bridge stands vertically. If it leans to one side, use both hands to adjust. Make sure that each string passes over the corresponding slits in the bridge. Bad Bad Vertical Body Bridge seat Tailpiece Make sure that the strings are resting in their appropriate grooves in the bridge when playing the instrument. Strings may come out of their grooves when adjusting the bridge or changing strings. Since the first (E) and fourth (G) strings tend to come out of their grooves easily, use your fingers to hold the strings gently in place when tuning the instrument. Also, the 1st (E) string is fitted with a protective tube. Make sure that the tube rests on the bridge. It is not designed to protect the instrument from impacts. Do not expose the instrument to impact or strong pressure while carrying or storing the instrument. · Remove the shoulder rest before placing the instrument in the soft case. Stereo Inner Earphones, Cable, Rosin, etc. Bow Case Instrument Belt Control Box Shoulder rest 10 Usage Sound Output Basics 1 2 3 First, connect the instrument to the Control Box using the supplied cable. Connect the supplied stereo inner earphones to the jack with the mark. To reproduce sound from an external audio device, use a cable that matches the input jack on the audio device and connect it to the instrument's LINE OUT jack. Press and hold the power button on the Control Box for about 1 second to switch the power ON and light the LCD display. * The power will not switch ON if the HOLD switch is in the lower position. Slide the HOLD switch to the upper position and press the POWER button again. * To switch the power off, hold the POWER button for more than 2 seconds. 4 The volume is controlled with the volume control on the instrument, and the VOL/MUTE dial on the Control Box. The volume control on the instrument only adjusts the instrument's volume, while the VOL/ MUTE dial on the Control Box adjusts the overall volume level (0 to 30) of the violin plus the effect/ metronome/player. * This instrument will not produce any sound if the volume control on the instrument is set to "0". * Pressing the VOL/MUTE dial engages the mute function and displays the icon ( ). Press the VOL/MUTE dial again disengages the mute and the headphones icon ( ) reappears. [. . . ] * The maximum number of subfolder hierarchies is 5. * The maximum number of characters for the full path name (from the root folder through all the tied folders) is 258. * File names using umlaut, circumflex, Asian multi-byte language, etc. * Compatible with SD memory cards of up to 2GB (not compatible with SDHC cards). [. . . ]