User manual YAMAHA T-M555L

[. . . ] If this equipment does cause harmful interference to radio or television reception, which can be determined by tuning the equipment off and on, the user is encouraged to try 1 to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. ­ Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ­ Consult the dealer or an experienced radio/TV technician for help. [. . . ] The "MEMORY" indicator will go out, and memorization will be finished. A B WIDE NARROW 3 FRANÇAIS ANTENNA POWER FM IF BAND MONO BAND MEMO DISPLAY STEREO TUNER T-M555L ST NAME PRESET TUNING AUTO 5 2, 4 1. Select and display the preset channel you wish to register. The display's frequency indicator will go out, "MEMORY" will flash and "_ _ _ _ _ _ _ _" will appear. Blinking CALLING UP STORED STATIONS 1. Confirm that the "PRESET" indicator is lit on the display. If not lit, press the PRESET button to turn it on. Turn the GYRO CONTROL ring to select the desired preset station. * When a station other than a preset station is selected, and the CHAR. button is pressed, the frequency indicator will remain lit, the "PRESET" indicator will flash and the station name can not be registered. Use the GYRO CONTROL ring to input the desired number or letter at the first flashing digit on the left side. When the GYRO CONTROL ring is turned to the right, input will . . change in the following order: A ­ Z _ 0­9 A ­. The "MEMORY" indicator will flash on the display. While the "MEMORY" indicator is flashing (approx. 5 sec. ), turn the GYRO CONTROL ring to set the present number to "00". The preset number and "CLEAR" indicator will flash for approx. 2 seconds on the display and the memory will be deleted. Station names memorized for the preset station will also be deleted at the same time. PRESET UP ( ) / DOWN ( ) BUTTON Every time the UP or DOWN side of the PRESET button is pressed, the preset number will advanced one step in the upward or downward direction. The unused preset numbers without memory contents are skipped. This button is also used as the CURSOR button in the station name input mode. PRESET MEMORY ON THE REMOTE CONTROL UNIT This unit is equipped with the one-touch preset tuning system which is particularly convenient when there is a large number of receivable stations. The preset tuning system allows up to 60 stations on FM and AM to be preset in a random order. 7 FRANÇAIS DISPLAY button BAND button ENGLISH BUTONNS AND OPERATION OF THE REMOTE CONTROL UNIT HOW TO PRESET A FREQUENCY IN THE MEMORY 1. Press the BAND button to select the desired band (FM/AM). Press the TUNING UP/DOWN button to select the frequency of desired station. [. . . ] Change the direction of the AM loop antenna. Check whether noise is produced by other audio/video components, electrical appliances or fluorescent lamps in your room. 4. Stations can be received by manual tuning, but not by auto tuning. Change the direction of the AM loop antenna or external antenna. [. . . ]