User manual YAMAHA THR10

[. . . ] COMPLIANCE INFORMATION STATEMENT (DECLARATION OF CONFORMITY PROCEDURE) ResponsibleParty: YamahaCorporationofAmerica Address: 6600OrangethorpeAve. , BuenaPark, Calif. 90620 Telephone: 714-522-9011 TypeofEquipment: GUITARAMPLIFIER ModelName: THR10/THR5 ThisdevicecomplieswithPart15oftheFCCRules. Operationissubjecttothefollowingtwoconditions: 1)thisdevicemaynotcauseharmfulinterference, and 2)thisdevicemustacceptanyinterferencereceivedincludinginterferencethatmaycause undesiredoperation. Seeusermanualinstructionsifinterferencetoradioreceptionissuspected. *ThisappliesonlytoproductsdistributedbyYAMAHACORPORATIONOFAMERICA. (FCCDoC) FCC INFORMATION (U. S. A. ) 1. [. . . ] A combination of a low-gain preamp section and EL34s in the power section give rich, controllable distortion with great midrange definition. u BASS (THR10 only) Tone adjustment for the guitar's sound. Rotate the knob clockwise to enhance the low range frequencies. BRIT HI: EL34s keep the classic British clarity while a higher gain preamp allows you to push the amp into serious distortion. i MIDDLE (THR10 only) Tone adjustment for the guitar's sound. Rotate the knob clockwise to enhance the mid-range frequencies. MODERN: Ultra high-gain input section combined with 6L6 output section delivers smooth, powerful distortion and awesome power amp compression. o TREBLE (THR10 only) Tone adjustment for the guitar's sound. Rotate the knob clockwise to enhance the high-range frequencies. * The following amp types are available only on the THR10. BASS: High-power all-tube design for dynamic, driving bass tone. !0 TONE (THR5 only) Tone adjustment for the guitar's sound. Rotate the knob clockwise to brighten the sound and counterclockwise to darken it. ACO: Electro-acoustic optimized input with mic simulations for natural, clear tone. FLAT: Flat response clean input for line sources, tone and effect controls allow shaping of non-guitar sources. !1 EFFECTS Selects one of the four different effects; CHORUS, FLANGER, PHASER, and TREMOLO. Rotate the knob clockwise to increase the amount of each effect. * Rotate the knob fully to the left (· position) to set the effect OFF. t GAIN Adjusts the amount of guitar distortion. Rotate the knob clockwise to increase the amount of distortion. * On the THR10, the blend function, which blends the pickup direct sound with the mic simulation sound, is active when ACO is selected with the AMP r control. (Setting the blend function to its minimum level produces the pickup direct sound only while a maximum setting produces the mic sound only. ) !2 DLY/REV Selects one of the four different effects; DLY (delay), DLY/REV (delay/reverb), SPRING (spring reverb), and HALL (hall reverb). Rotate the knob clockwise to increase the amount of each effect. * Rotate the knob fully to the left (· position) to set the effect OFF. * When DLY or DLY/REV is selected, the TAP/ TUNER e button can be used to set the delay time freely. y MASTER Adjusts the volume for the amp section. Rotate the knob clockwise to increase volume while reproducing compression and poweramp distortion of the simulated amp. * Only adjusts the volume when BASS, ACO, or FLAT is selected with the AMP r control (THR10 only). !3 GUITAR OUTPUT (THR10 Only) Adjusts the overall volume of the guitar sound. 10 Names And Functions !4 VOLUME (THR5 only) Adjusts the overall volume of the guitar sound. n Rear Panel @0 @1 !5 USB/AUX OUTPUT (THR10 only) Adjusts the audio playback volume for audio from the computer connected to the USB @0 jack or an audio device connected to the AUX !8 jack. !6 INPUT This jack is used to connect a guitar to the unit. @0 USB Use the supplied USB cable to connect a computer to the unit. !7 PHONES This a standard phone jack used to connect a pair of stereo headphones to the unit. It can also be used as a line out jack. * Main speaker sound is muted when a connector is inserted into the PHONES jack. @1 DC IN Connects the supplied power adaptor. !8 AUX This is a stereo mini phone jack used for audio input from an external device such as an MP3 player, etc. !9 USER MEMORY (THR10 only) Saves up to five sets of amp section controller settings (GAIN, MASTER, BASS, MIDDLE, TREBLE, EFFECT, DLY/REV). Press and hold the number of the switch you want to save your settings to (about 2 seconds). The save operation is complete when the memory number for the switch being pushed appears in the LED display. Press one of the numbered switches (less than 2 seconds) to recall the saved settings. About the Default Settings (THR10 only) To reset user memory 1-5 contents to their factory defaults, switch on the power while holding down USER MEMORY switches 1, 3, and 5. Hold down switches 1, 3, and 5. Switch on the power. 11 Connection n Connection Examples * Before making any connections, make sure that the power on all devices is switched OFF. * When connecting the unit to an external device, check the shape of the jack and use an appropriate cable that matches with the jack's specifications and connect surely. USB Cable (supplied) Computer USB Jack * On the THR5, use the volume on the audio device to adjust the volume for the external audio source. If it is connected to a computer via USB, you can adjust the USB output volume with the THR Editor. (page 16) Audio output from an audio player or computer Electric Guitar/Bass/ Electric Acoustic Guitar, etc. Headphones Precautions in regard to using the USB jack Make sure you follow the points below when connecting a computer to the THR10/5 USB jack. Failing to do so may result in the computer or the THR10/5 freezing or shutting down, as well as corruption or even loss of data. [. . . ] Sivoussouhaitezvousdébarrasserdesdéchetsd'équipementsélectriquesetélectroniquesveuillezcontactervotrevendeur oufournisseurpourplusd'informations. Cessymbolessontseulementvalablesdansl'UnionEuropéenne. Sivoussouhaitezvousdébarrasserdedéchetsd'équipementsélectriquesetélectroniquesoudepilesusagées, veuillezcontacterlesautoritéslocalesouvotrefournisseuretdemanderlaméthodedetraitementappropriée. ----------------------------------------------------------------------------------------------------------------------------------------------------------------------- [Pour les professionnels dans l'Union Européenne] [Information sur le traitement dans d'autres pays en dehors de l'Union Européenne] Cd Cesymbolepeutêtreutiliséencombinaisonavecunsymbolechimique. Danscecasilrespectelesexigencesétabliesparla Directivepourleproduitchimiqueenquestion. Note pour le symbole «pile» (deux exemples de symbole ci-dessous): Verbraucherinformation zur Sammlung und Entsorgung alter Elektrogeräte und benutzter Batterien ----------------------------------------------------------------------------------------------------------------------------------------------------------------------BefindensichdieseSymboleaufdenProdukten, derVerpackungund/oderbeiliegendenUnterlagen, sosolltenbenutzteelektrischeGeräteundBatteriennichtmitdemnormalenHaushaltsabfallentsorgtwerden. InÜbereinstimmungmitIhrennationalenBestimmungenunddenRichtlinien2002/96/ECund2006/66/EC, bringenSiealte GeräteundbenutzteBatterienbittezurfachgerechtenEntsorgung, WiederaufbereitungundWiederverwendungzudenentsprechendenSammelstellen. DurchdiefachgerechteEntsorgungderElektrogeräteundBatterienhelfenSie, wertvolleRessourcenzuschützen, undverhindernmöglichenegativeAuswirkungenaufdiemenschlicheGesundheitunddieUmwelt, dieandernfallsdurchunsachgerechte Müllentsorgungauftretenkönnten. [. . . ]