User manual YAMAHA TNR-W

[. . . ] 1 EN About the Manuals About the Manuals The TENORI-ON is provided with the four manuals listed below. Quick Guide The Quick Guide provides instructions on setup and basic operation that will get you started as quickly as possible. TENORI-ON Manual (This manual; PDF) The manual is provided as an electronic document on the supplied CD-ROM, and it provides detailed descriptions and procedures that will help you take full advantage of the TENORION's many advanced features. Refer to the Quick Guide for basic information such as turning on the power, the functions of the panel controls, and more. Precautions This document lists a number of points you need to be aware of in order to use the TENORION properly and safely. Guarantee information and after-service contact details are also included. Installation Guide Explains the procedure for installing the "TENORI-ON User Voice Manager" software that is included on the supplied CD-ROM on your computer. Using the PDF Manual Click the item you want to refer to in the "Bookmarks" index to the left of the main display window to go to the corresponding page. Click the "Bookmarks" tab to open the index if it is not showing. [. . . ] When ON the repeat timing of notes played in the Solo Mode is synchronized with playback timing in the Score Mode (layers 1 -- 7). Range . Push Sensitivity Push Sensitivity 150msec Sets the long-press time for the LED buttons. The TENORI-ON recognizes a button press as a "long press" when the button is held for longer than the specified Push Sensitivity setting. Range . Master Tuning Master Tuning 0CENT Master tuning for the internal MIDI tone generator and the user voices. This parameter has no effect on the user voices (numbers <01/16, > <02/16, > and <03/16>). Range . No display TENORI-ON Manual 60 Parameter Settings Setting Parameters with the Jog Dial Preference Menu 4. Local Control Local Control ON Determines whether TENORI-ON performance input (data) controls the internal MIDI tone generator (ON) or not (OFF). When set to "OFF" no sound will be output from the TENORI-ON speakers or headphone jack, but performance data will still be transmitted via the MIDI connector. Also, the LED buttons will produce no sound when operated if this parameter is set to "OFF. " Range . Synchronize Synchronize MASTER Sets the master or slave status for multiple TENORI-ON units to be synchronized via a MIDI connection. The "Master" TENORI-ON provides the clock for all "Slave" TENORI-ON units. A TENORI-ON set to the Slave mode will only function properly if correctly connected to the Master TENORI- ON. For synchronized operation, make sure that the Master TENORI-ON is playing back at a tempo that is close to the tempo at which the performance data for the Slave TENORI-ON was created. The Slave performance may not be reproduced properly if there is too great a difference between the tempos. Range . Loop Indicator Loop Indicator ON Determines whether the loop indicator is visible (ON) or not (OFF) in the Score Mode. This setting applies to all Score Mode layers (layers 1 -- 7). Range . Loop indicator TENORI-ON Manual 61 Parameter Settings Setting Parameters with the Jog Dial File Menu File Menu The File menu provides access to functions that allow you to save data to an SD Memory Card, load sample files, and more. The File menu submenu includes the following 6 items. 1. 6. Song All Blocks Current Block Current Layer All Settings Samplings Page 64 Page 68 Page 73 Page 78 Page 83 Page 88 Use the jog dial to highlight a submenu item, then press the [OK] button to go to the corresponding parameter edit display. [File menu] Song All Blocks Current Block Each item in the File menu submenu has a further 3 -- 5 functions that you will need to select from. After accessing a submenu, use the jog dial to highlight the desired function and then press the [OK] button. Function Name Submenu Name Song Operation: Load File Name Song: Load 0302E-SONG-01 0302E-SONG-02 0302G-SONG-01 Refer to the Display Message List on Page 111 for information about error messages that may be displayed during SD Memory Card access operations. The TENORI-ON can only display file names consisting of up to 16 ASCII characters, not including the file extension. 2-byte characters cannot be displayed. Files saved to an SD Memory Card are saved in a "TENORI-ON" folder that is automatically created on the card. Up to 1, 000 files can be stored in the TENORI-ON folder, or up to 256 files of each file-extension type. Before using SD Memory Cards with the TENORI-ON, be sure to read "Handling SDTM Memory Cards" on Page 63. TENORI-ON Manual 62 Parameter Settings Setting Parameters with the Jog Dial File Menu Handling SDTM Memory Cards *SD Memory Card is a registered trademark of the SD Card Association. This instrument features a built-in SD Memory Card slot. It lets you save original data you've created on the instrument to a SD Memory Card, and allows you to load data from a card to the instrument. Be sure to handle SD Memory Cards with care. [. . . ] Not enough remaining SD Memory Card capacity. Save and rename operations can only be performed on up to 100 files that have file names in which the first five characters are the same. Set the card's write-protect switch to the OFF position. Not enough remaining SD Memory Card capacity. [. . . ]