User manual YAMAHA TOOLS FOR NUAGE INSTALLATION GUIDE

[. . . ] TOOLS for NUAGE Installation Guide Information • This software and Installation Guide are the exclusive copyrights of Yamaha Corporation. • Copying of the software or reproduction of this Installation Guide in whole or in part by any means is expressly forbidden without the written consent of the manufacturer. [. . . ] • Copying of the commercially available musical data including but not limited to MIDI data and/or audio data is strictly prohibited except for your personal use. TOOLS for NUAGE Installation Guide 1 TOOLS for NUAGE — An Introduction TOOLS for NUAGE is a package of applications required in order to connect Nuage devices to a computer. In specific terms, it comprises NUAGE Workgroup Manager, NUAGE Extension, and NUAGE PT Bridge (Mac only). Using the TOOLS for NUAGE installer, you can select which of these applications to install or you can install all of them together.  NUAGE Workgroup Manager NUAGE Workgroup Manager is an application that allows multiple devices and DAW applications to be controlled as a single group, referred to as a Workgroup. Adding Nuage Fader, Nuage Master, DAW application such as Nuendo, and the like to a Workgroup in this way makes it possible to control Nuendo from the Nuage Fader and Nuage Master devices. NUAGE Workgroup Manager must be installed on one of the computers on the network being used.  NUAGE Extension NUAGE Extension provides support for connectivity between Nuage devices and Nuendo. It must be installed on any computers on the network running Nuendo.  NUAGE PT Bridge NUAGE PT Bridge is an application that makes it possible to control* Pro Tools (Mac only) using Nuage Fader and Nuage Master devices. It must be installed on any Mac computers on the network running a compatible version of Pro Tools. (*: basic functions only. ) NOTE • For details regarding restrictions, setting methods, button functions, and the like, please refer to the Nuage Fader and Nuage Master operation manuals, which can be downloaded from the following website. http://www. yamahaproaudio. com/downloads/ Typical Workgroup configuration The following diagram shows the condition when all devices have—after first being connected using Ethernet cables—been added to a Workgroup using NUAGE Workgroup Manager. Workgroup Computer (Nuendo) Computer (Nuendo) Mac (Pro Tools) NUAGE Extension NUAGE Extension NUAGE PT Bridge NUAGE Workgroup Manager Network switch NUAGE FADER NUAGE MASTER NUAGE I/O TOOLS for NUAGE Installation Guide 2 TOOLS for NUAGE Installation NOTE • You are only permitted to use this software pursuant to the terms and conditions of the “License Agreement” shown during the installation. • If the same software components have already been installed in your computer, you can use the same procedure as described in the Installation instructions here to update the software. Windows Before installing A warning message similar to that shown below may be displayed during the installation process. [. . . ] Follow the onscreen instructions to remove the software. NOTE [Change] allows you to add or remove individual pieces of software. After the downloaded compressed file is properly extracted, double-click the file “Uninstall TOOLS for NUAGE. ” Click [Run] when the “Welcome to the TOOLS for NUAGE uninstaller” window appears. After that, follow the on-screen instructions to uninstall the software. 4 After completing the uninstallation, an “Uninstallation completed” window appears. Click [Close]. Uninstallation of the TOOLS for NUAGE is now complete. Uninstallation of the TOOLS for NUAGE is now complete. C. S. G. , Pro Audio Division © 2012 Yamaha Corporation 211MW-A0 TOOLS for NUAGE Installation Guide 4 [. . . ]