User manual YAMAHA TSX-130

[. . . ] U DESKTOP AUDIO SYSTEM SYSTEME AUDIO DESKTOP TSX-130 OWNER'S MANUAL MODE D'EMPLOI IMPORTANT SAFETY INSTRUCTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 1 2 3 4 5 6 7 8 9 · Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. 10 11 12 Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. IMPORTANT Please record the serial number of this unit in the space below. [. . . ] Music starts from the beginning of the selected folder ( P. USB (MP3/WMA files) Set a folder number. Music starts from the beginning of the selected folder ( P. FM Set preset number/frequency. 3 Select the music source from iPod/FM/CD/USB or LAST SET. LAST SET Keep the setting you set last time. Note The SOURCE screen is skipped automatically if you select BEEP in step 1. iPod You can select PLAYLIST or RESUME PLAY. The music starts from the beginning of the playlist. Before this operation, make a playlist on your iPod ( P. 7). Select and set PLAYLIST. If the SOURCE is not set completely or the music device is not set, the unit plays back the beep sound instead. For example, if the unit cannot read your iPod, the beep sound plays back. 4 Set the alarm volume. The volume is set with ENTER in step 4, then the alarm setting is complete. The alarm is set to on automatically. Switching on/off the alarm Select and set the desired playlist. You can switch on/off the alarm with ALARM1/ ALARM2, but the alarm settings are not deleted with this operation. Switch on/off the alarm function. Select and set RESUME PLAY when you want to resume the music, which you listen to last time, as the alarm sound. When the alarm is on, the alarm indicator and time light up. 6 En USING USEFUL FUNCTIONS Using the snooze function When the beep sound, music, or both are played back, you can set the snooze function. Stopping the alarm sound You can stop the alarm sound in the 3 ways as follows. When you stop alarm sound, the system is set to off. Set the snooze function. Press ALARM1/ALARM2. Press ON/OFF. The function differs depending on the alarm type you set in TYPE ( P. BEEP: The beep sound stops by pressing SNOOZE/ SLEEP, and resumes after 5 minutes. MUSIC: The music stops by pressing SNOOZE/SLEEP, and resumes after 5 minutes. BEEP+MUSIC: With one click of SNOOZE/SLEEP, you can stop the beep sound and keep playing back the music. y You can also set the snooze function by pressing SLEEP on the remote control instead of SNOOZE/SLEEP on the unit. OPERATION Press and hold SNOOZE/SLEEP for 2 seconds. y · If you do not stop the alarm, the alarm stops after 60 minutes automatically. · When you stop the alarm, the alarm indicator disappears. To activate the alarm function again, press ALARM1/ALARM2 to set the alarm to on. · When you stop the alarm, the time setting, etc. , is saved for convenient use next time. Note Any operations other than setting the snooze function, stopping the alarm sound, or adjusting the volume control are not available while playing back the alarm sound. About Playlist You can collect your favorite songs in the library on your iPod and make a list. If you select a playlist for playback, the songs in the playlist will be played back. Even if you delete a song in a playlist, it is not deleted from the library. y For more details on playlists, refer to the instruction manual of your iPod. English 7 En USING USEFUL FUNCTIONS Setting sleeping mode You can set the time to turn off the system automatically. 2 Select the desired dimmer level. Select the sleep time. Press repeatedly. Switching DSP mode When the sleep function is on, the SLEEP indicator lights up. [. . . ] · Do not use a protective cover to prevent scratches. · Do not use a disc that has a printable surface using a commercially available label printer. · Do not insert more than one disc into the disc slot at one time. This can cause damage to both this unit and the discs. [. . . ]