User manual YAMAHA UX16E

[. . . ] Owner's Manual SPECIAL MESSAGE SECTION This product utilizes an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer's warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! [. . . ] Use the MIDI IN cable to connect your MIDI keyboard etc. , and play it. The MIDI IN indicator will light when MIDI messages pass through the cable. q Using two or more UX16s Follow the steps below to connect two or more UX16s. You do not need to reinstall the driver. Connect the USB cable to the USB terminal of your computer (or USB hub). Computer IN OUT IN OUT or Computer IN USB hub OUT IN OUT NOTE When you turn on the power to connected multiple UX16s, the device number is assigned, starting with 0, to the units in the order in which you turn on the power. If you turn on the power to all units simultaneously, the device number is assigned based on the order of the port numbers of the USB hub. However, this order may change depending on the hub. Use a USB hub that obtains its power from a power adaptor. Operation may be unstable with a bus-powered USB hub. NOTE 15 Macintosh users: First install OMS before you install the USB-MIDI driver. Also, after installing the driver, you will need to set up OMS (page 18). q Installing OMS 1. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the desktop. Double-click to open the CD-ROM icon and double-click the "Install OMS 2. 3. 6" icon in the "OMS 2. 3. 6" folder inside "OMS E. " Follow the instructions on the screen to install OMS. For more information on installing and using OMS, refer to the included "OMS_2. 3_Mac. pdf" manual. q Installing the USB-MIDI driver 1. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the desktop. Double-click the CD-ROM icon and double-click the "Install USB Driver" icon to display the following installation screen. 16 4. The "Install Location" box displays the destination of the installation. If you wish to change the destination disk or folder, use the [Switch Disk] button and the pop-up menu to specify the desired destination. NOTE This box usually displays the start-up disk as the destination. 5. The system displays the following message: "This installation requires your computer to restart after installing this software. Click Continue to automatically quit all other running applications. " Click [Continue]. NOTE To cancel the installation, click [Cancel]. 6. If the driver has already been installed, you will receive the following message. To complete the installation, click [Quit]. 7. [. . . ] Siemensstraße 22-34, 25462 Rellingen, F. R. of Germany Tel: 04101-3030 AUSTRIA Yamaha Music Austria Schleiergasse 20, A-1100 Wien Austria Tel: 01-60203900 THE NETHERLANDS Yamaha Music Nederland Kanaalweg 18G, 3526KL, Utrecht, The Netherlands Tel: 030-2828411 BELGIUM Yamaha Music Belgium Keiberg Imperiastraat 8, 1930 Zaventem, Belgium Tel: 02-7258220 FRANCE Yamaha Musique France, Division Claviers BP 70-77312 Marne-la-Vallée Cedex 2, France Tel: 01-64-61-4000 ITALY Yamaha Musica Italia S. P. A. , Home Keyboard Division Viale Italia 88, 20020 Lainate (Milano), Italy Tel: 02-935-771 SPAIN/PORTUGAL Yamaha-Hazen Electronica Musical, S. A. 17, 200, 28230 Las Rozas (Madrid) Spain Tel: 91-201-0700 GREECE Philippe Nakas S. A. Navarinou Street 13, P. Code 10680, Athens, Greece Tel: 01-364-7111 SWEDEN Yamaha Scandinavia AB J. [. . . ]