User manual YAMAHA UX96E

[. . . ] USB-MIDI INTERFACE Owner's Manual Bedienungsanleitung Mode d'emploi Français Deutsch English SPECIAL MESSAGE SECTION This product utilizes an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. NOTICE: Service charges incurred due to a lack of knowledge relating to how a function or effect works (when the unit is operating as designed) are not covered by the manufacturer's warranty, and are therefore the owners responsibility. Please study this manual carefully and consult your dealer before requesting service. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind. The use of an extension cord is not recommended! [. . . ] Also, after installing the driver, you will need to set up OMS (page 17). q Installing OMS 1. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the desktop. Double-click to open the CD-ROM icon and double-click the "Install OMS 2. 3. 6" icon in the "OMS 2. 3. 6" folder inside "OMS E. " Follow the instructions on the screen to install OMS. For more information on installing and using OMS, refer to the included "OMS_2. 3_Mac. pdf" manual. q Installing the USB-MIDI driver 1. Insert the included CD-ROM into the CD-ROM drive. The system displays the CD-ROM icon on the desktop. 15 3. Double-click the CD-ROM icon and double-click the "Install USB Driver" icon to display the following installation screen. 4. The "Install Location" box displays the destination of the installation. If you wish to change the destination disk or folder, use the [Switch Disk] button and the pop-up menu to specify the desired destination. NOTE This box usually displays the start-up disk as the destination. 5. The system displays the following message: "This installation requires your computer to restart after installing this software. Click Continue to automatically quit all other running applications. " Click [Continue]. NOTE To cancel the installation, click [Cancel]. 6. If the driver has already been installed, you will receive the following message. To complete the installation, click [Quit]. 16 7. When the installation is complete, the system displays the following message: "Installation was successful. You have installed software which requires you to restart your computer. " Click [Restart]. You can locate the installed files in the following locations: · System Folder | Control Panels | YAMAHA USB MIDI Patch · System Folder | Extensions | USB YAMAHA MIDI Driver · System Folder | OMS Folder | YAMAHA USB MIDI OMS Driver q Setting up OMS 1. Use the included USB cable to connect the USB terminal of the computer (or the USB hub) to the USB terminal of the UX96. Make sure that the UX96 is powered on and the power LED lights up. Open the "OMS Applications" folder in the "Opcode" folder installed on the hard disk, and double-click the "OMS Setup" icon to start the setup program. If the AppleTalk dialog appears, click [Turn It Off], then click [OK] in the subsequent dialog box. The system displays the "Create a New Studio Setup" dialog box. [. . . ] Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 PHILIPPINES Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 ARGENTINA Yamaha Music Argentina S. A. Viamonte 1145 Piso2-B 1053, Buenos Aires, Argentina Tel: 1-4371-7021 DENMARK YS Copenhagen Liaison Office Generatorvej 8B DK-2730 Herlev, Denmark Tel: 44 92 49 00 SINGAPORE Yamaha Music Asia Pte. , Ltd. 11 Ubi Road #06-00, Meiban Industrial Building, Singapore Tel: 65-747-4374 PANAMA AND OTHER LATIN AMERICAN COUNTRIES/ CARIBBEAN COUNTRIES Yamaha de Panama S. A. [. . . ]