Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual YAMAHA VENTURE 600-2000. We hope that this YAMAHA VENTURE 600-2000 user guide will be useful to you.
Lastmanuals help download the user guide YAMAHA VENTURE 600-2000.
Manual abstract: user guide YAMAHA VENTURE 600-2000
Detailed instructions for use are in the User's Guide.
[. . . ] È. ) 2 The engine number is stamped in the location as shown. Ê. ) Also, record and keep the ID numbers in a separate place in case the snowmobile is stolen.
ESU00011
2-
INTRODUCTION
Congratulations on your purchase of a Yamaha snowmobile. This model is the result of Yamaha's vast experience in the production of fine sporting and touring snowmobiles. It represents the high degree of craftsmanship and reliability that have made Yamaha a leader in these fields. [. . . ] Operation of the snowmobile on the following surfaces should be avoided at all times: 1. Bare pavement Other surfaces that should be avoided for the sake of drive track and slide runner life are: 1. Snow mixed with a lot of dirt and sand All of the above surfaces have one thing in common in regard to drive track and slide runners; little or no lubricating ability. Drive track and all slide rail systems require lubrication (snow or water) between the slide runners and the slide metal. In the absence of lubrication, the slide runners will rapidly wear and in severe cases, literally melt away, and the drive track will be subject to damage or failure. Also traction aids such as studs, cleats, etc. , may cause further track damage or failure.
CAUTION:
@
Ride on fresh snow frequently. Operating on ice or hard-packed snow will rapidly wear the slide runners.
@
7-8
ESU00251
Maximizing drive track life
Recommendations Track tension During initial break-in, the new drive track will tend to stretch quickly as the track settles. Be sure to correct the track tension and alignment frequently. (See pages 8-238-25 for adjustment procedures. ) A loose track can slip (ratchet), derail or catch on suspension parts causing severe damage. Do not overtighten the drive track, otherwise it may increase the friction between the track and the slide runners, resulting in the rapid wear of both components. Also, this may put an excessive load on the suspension components, resulting in component failure. Press the throttle lever slowly to move the snowmobile. Turn the handlebar in the desired direction. Squeeze the brake lever to stop the snowmobile. Apply the parking brake by moving the parking brake lever to the left.
A
B
ESU00137
Stopping the engine
Turn the main switch to the "OFF" position to stop the engine. 1 "OFF" È SXV60 É SXV60ER/VT60
WARNING
@
G G
Push down the engine stop switch to stop the engine in an emergency. Make sure that the key is removed from the main switch whenever the operator leaves the snowmobile, to prevent accidental starting.
@
7-11
ESU00138
Transporting
When transporting your snowmobile on a trailer or in a truck, observe the following recommendations to help protect it from damage:
G
G
G
Make sure that the fuel level in the fuel tank is lower than the bottom of the carburetors. Otherwise, the vibration and bumps from the road surface could make it possible for fuel to flow through the carburetors into the crankcase. This can result in "hydrostatic lock, " a condition where the engine cannot rotate because of fuel accumulated in the engine. Severe engine damage can result from hydrostatic lock. When possible, the fuel tank should be empty during transportation, especially if the trip will be longer than 30 minutes. If transporting the snowmobile in an open trailer or truck, put a tight fitting cover on the snowmobile. [. . . ] This is more important in areas where oxygenated fuel (gasohol) is used, because the alcohol content in the fuel increases the chance for water to enter the engine. Use Yamaha Stor-Rite Engine Fogging Oil, or an equivalent fogging oil, to protect both the com-
bustion chamber and crankshaft from corrosion. An alternate method is to remove the carburetor silencer and squirt oil into the carburetor throats while the engine is running.
CAUTION:
@
Do not attempt to store the snowmobile by simply starting the engine occasionally during the storage period. Moisture and acids form during combustion which can actually increase the chance for corrosion damage during the storage period.
@
5. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE YAMAHA VENTURE 600-2000
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual YAMAHA VENTURE 600-2000 will begin.