User manual YAMAHA VL70-M

[. . . ] IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. [. . . ] The "Depth" setting is reflected in the graph at the bottom of the display -- the horizontal axis represents the controller value and the vertical axis represents scream. Controllers & Control Editing 59 31: Scr Curve (VOICE mode only) · Scream Curve · Settings: -16 . . . +16 · The "BnzCtrlDpt" parameter, below, must be set to an appropriate value (higher than "+01" ro lower than "-01") for breath noise control to have any effect. 33(21): BnzCtrlDpt · Breath Noise Control Depth · Settings: -127 . . . +63) Determines the relationship between the controller value and scream. When set to "+00" the relationship is linear. That is, a change in the controller value produces a corresponding change in scream effect. As the curve value increases the lower end of the controller range has relatively little effect on the sound while higher controller values produce more dramatic changes. Negative curve values have the opposite effect: the sound changes dramatically at low controller values while higher values produce relatively little effect. The "Curve" setting is reflected in the graph at the bottom of the display -- the horizontal axis represents the controller value and the vertical axis represents scream. Sets the amount of variation produced by the controller assigned to breath noise. The higher the value the greater the variation. Positive values cause an increase in breath noise in response to higher controller values (e. g. increased breath pressure or higher modulation wheel position), while minus values cause a decrease in breath noise in response to higher controller values. The "Depth" setting is reflected in the graph at the bottom of the display -- the horizontal axis represents the controller value and the vertical axis represents breath noise. 34: Bnz Curve (VOICE mode only) Breath Noise 32(20): Bnz CC No. · Breath Noise Control Change Number · Settings: off. . . 95, AT, VEL, PB · Breath Noise Curve · Settings: -16 . . . +16 "Breath Noise" can be used to add the required amount of breath noise to a voice. The "Bnz CC No. " parameter specifies the controller to be used for breath noise control. When set to "off", no breath noise variation can be produced via a controller, but a continuous breath noise value is determined by the "33(21): BnzCtrlDpt" parameter, below (negative values increase the breath noise level). Determines the relationship between the controller value and breath noise. When set to "+00" the relationship is linear. That is, a change in the controller value produces a corresponding change in breath noise. As the curve value increases the lower end of the controller range has relatively little effect on the sound while higher controller values produce more dramatic changes. Negative curve values have the opposite effect: the sound changes dramatically at low controller values while higher values produce relatively little effect. The "Curve" setting is reflected in the graph at the bottom of the display -- the horizontal axis 60 Controllers & Control Editing represents the controller value and the vertical axis represents breath noise. · The amount of breath noise produced also depends on pressure, so the breath noise curve indicated by the graph at the bottom of the display may not always accurately reflect the perceived curve. Sets the amount of variation produced by the controller assigned to growl. [. . . ] Wettergrens Gata 1 Box 30053 S-400 43 Göteborg, Sweden Tel: 031 89 34 00 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRASIL Yamaha Musical Do Brasil LTDA. Reboucas 2636, São Paulo, Brasil Tel: 011-853-1377 PHILIPPINES Yupangco Music Corporation 339 Gil J. Box 885 MCPO, Makati, Metro Manila, Philippines Tel: 819-7551 PANAMA Yamaha De Panama S. A. [. . . ]