User manual YAMAHA VL7E2

[. . . ] IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. [. . . ] No breakpoint can be set to a key lower than the breakpoint to its left. q Breakpoint 1 . . . 63. Set the amount of cutoff frequency offset for each of the breakpoints defined by the breakpoint key parameters, above. Negative values lower the cutoff frequency, and positive values raise the cutoff frequency at the corresponding breakpoint. No matter what offset value is chosen, the actual cutoff frequency will never exceed its minimum or maximum absolute value. When different offset values are applied to adjacent breakpoints, the cutoff frequency varies smoothly between the breakpoints. 94 Feature Reference q Edit Mode 3-5: Throat Formant LPF Key Scalling Throat formant LPF key scaling produces natural throat formant tone variations across the range of the keyboard by allowing different cutoff frequency offset values to be applied to each of three breakpoints set at appropriate keys. Element Miscellaneous · The § button ("Bpag") can be used to go directly back to the next throat formant key scaling page without having to return to the main parameter page. q LPF 31. 1 Hz . . . 24. 0 kHz. The "LPF" parameter is linked to the main throat formant "LPF Cutoff Freq" parameter, and sets the cutoff frequency of the throat formant low-pass filter. Components above the specified frequency are cut off. This value also determines the main cutoff frequency on which all key-scaled variations are based (indicated by a dotted line on the graph). q Breakpoint 1 . . . G8. Allows three separate key scaling breakpoints to be set at any notes between C-2 and G8. You can position the cursor at the appropriate breakpoint key parameter and use any of the normal data entry procedures, or use the keyboard. To use the keyboard for breakpoint entry, position the cursor at the appropriate breakpoint key parameter, press the · button ("Kbd"), and then press the key at which you want to set the breakpoint while "Kbd" appears in inverse characters. No breakpoint can be set to a key lower than the breakpoint to its left. q Breakpoint 1 . . . 63. Set the amount of cutoff frequency offset for each of the breakpoints defined by the breakpoint key parameters, above. Negative values lower the cutoff frequency, and positive values raise the cutoff frequency at the corresponding breakpoint. No matter what offset value is chosen, the actual cutoff frequency will never exceed its minimum or maximum absolute value. When different offset values are applied to adjacent breakpoints, the cutoff frequency varies smoothly between the breakpoints. 95 Feature Reference q Edit Mode 4: Mixing · An inverse "K"(°) next to a value means that key scaling can be applied to that parameter. Position the cursor at the appropriate parameter and then press the ¶ button ("KSC") to go directly to the key scaling page for that parameter. You can return to the mixing parameter page by pressing the ] button. q Driver Output 0 . . . 127. Adjusts the level of the instrument's "driver" output. The "Driver" signal is the direct output from the mouthpiece (or bow/string interface) without the resonance of the instrument's body. The higher the value the higher the output. q Pipe/String Output 0 . . . 127. Adjusts the main output from the instrument's pipe or string. [. . . ] Tel: 686-00-33 KOREA Cosmos Corporation #131-31, Neung-Dong, Sungdong-Ku, Seoul Korea Tel: 02-466-0021~5 PORTUGAL Valentim de Carvalho CI SA Estrada de Porto Salvo, Paço de Arcos 2780 Oeiras, Portugal Tel: 01-443-3398/4030/1823 MALAYSIA Yamaha Music Malaysia, Sdn. , Bhd. 16-28, Jalan SS 2/72, Petaling Jaya, Selangor, Malaysia Tel: 3-717-8977 BRASIL Yamaha Musical Do Brasil LTDA. Reboucas 2636, São Paulo, Brasil Tel: 55-11 853-1377 GREECE Philippe Nakas S. A. Navarinou Street 13, P. Code 10680, Athens, Greece Tel: 01-364-7111 PANAMA Yamaha De Panama S. A. [. . . ]