User manual YAMAHA VSS-100

[. . . ] (See the "Part Names and Functions" on page 3 for more information on Field Rotation parameters. ) The procedure for recalling and editing Field Rotation varies depending on the console you are using. Refer to the Owner's Manual that came with your console for more information. Editing Parameters in Studio Manager In Studio Manager, editable parameters appear in both the Field Rotation window and the Generic Editor window. The Field Rotation window enables you to edit Field Rotation specific parameters, and the Generic Editor window enables you to edit parameters common to Field Rotation and other Effects. Refer to the Studio Manager Owner's Manual for your console for more information on the Generic Editor window. Studio Manager Generic Editor window 2 Part Names and Functions 2 1 5 3 Field Rotation window 4 6 2 3 6 7 3 5 3 3 5 4 Console display 3 1 Parameter View Switches the parameters to be displayed or edited. [EDIT] Button: Edits parameters in the current data. [. . . ] See "3 Parameter" on page 5 for information on operations in the Generic Editor window and the console. Virtual Sound Field [VIEW] button Virtual Sound Field Changes the virtual sound field. Enlarge/Reduce Enlarge/Reduce Vertically In Field Scope, the virtual sound field can be enlarged or reduced in the vertical direction by dragging the mouse at the point where the circle that indicates the virtual sound field intersects the straight line that extends vertically from the circle's center. It can also be enlarged or reduced by pressing the arrow keys [] [] on the keyboard while holding down the button on the mouse. Enlarge/Reduce Horizontally In Field Scope, the virtual sound field can be enlarged or reduced in the horizontal direction by dragging the mouse at the point where the circle that indicates the virtual sound field intersects the straight line that extends horizontally from the circle's center. It can also be enlarged or reduced by pressing the arrow keys [] [] on the keyboard while holding down the button on the mouse. Enlarge/Reduce Overall The virtual sound field can be enlarged or reduced in all directions by dragging the mouse at the point where the circle that indicates the virtual sound field intersects the straight line that extends at a 45 degree angle from the center of that circle. It can also be enlarged or reduced by pressing the arrow keys [] and [] on the keyboard while holding down the button on the mouse. 4 Movement The virtual sound field can be moved by using the mouse to drag the center point (control handle) of the circle that indicates the virtual sound field. It can also be enlarged or reduced by pressing the arrow keys [] [] [] [] on the keyboard while holding down the button on the mouse. Rotation The virtual sound field can be rotated by using the mouse to drag the center point (control handle) of the straight line that extends to the virtual front-center speaker from center of the circle that indicates the field. It can also be rotated to the right by pressing the [] [] arrow keys on the keyboard while holding down the button on the mouse, and to the left by pressing the [] [] arrow keys while pressing the mouse button. This can be changed only if the Parameter View is [EDIT]. [VIEW] Button Switches between displaying and hiding the virtual speakers in Field Scope. 3 Parameter RADIUS/[RADIUS] Knob Enlarges or reduces the overall size of the virtual sound field. You can change this value by double clicking in the number display section of the Field Rotation window, then typing a number from the keyboard, or by dragging vertically with the mouse. In the Generic Editor window and console, the [RADIUS] knob can be used to change the current data. The [RADI KY1] knob can be used to change KEY 1, and the [RADI KY2] knob can be used for KEY 2. R. RATIO Changes the aspect ratio (vertical and horizontal proportions) of the virtual sound field. This is displayed in the Field Rotation window only when Surround Mode is 6. 1. Otherwise it will be grayed out. DIV R Display Displays the DIV R value. You can change this value by double clicking, then typing a number from the keyboard, or by dragging vertically with the mouse. If the setting is zero, only L/R is used. If 50 is set, the ratio between L/R and the center will be 50:50. When 100 is set, the signal will go to the center channel only. [LINK] Button/[F/R LINK] Knob Links DIV R to the DIV F value. When the two are linked, the DIV R value will be the same as the DIV F. This is displayed in the Field Rotation window only when Surround Mode is 6. 1. Otherwise it will be grayed out. 5 AUTOMATION Settings related to Automation. In Field Rotation, automation operates based on the virtual sound field set for KEY 1 and KEY 2 respectively. However, because automation can be set using each parameter for size, aspect ratio, position, and angle individually, very complex movement can be simulated. Automation Preview Scope With Preview Scope, you can view a preview animation of automation play, based on the currently set automation parameters. [. . . ] Furthermore, because it operates always, even when offline, it is not synchronized with operation in the main unit. RADIUS This sets the size of the virtual sound field. KEY 1 Size at the start point of automation. You can change this value using the procedure in section "2 Field Scope" on page 4 or in section "3 Parameter" on page 5, by double clicking in the number display section of the Field Rotation window, then typing a number from the keyboard, or by dragging vertically with the mouse. KEY 2 Size at the end point of automation. You can change this value using the procedure in section "2 Field Scope" on page 4 or in section "3 Parameter" on page 5, by double clicking in the number display section of the Field Rotation window, then typing a number from the keyboard, or by dragging vertically with the mouse. 7 PLAYBACK MODE/[RADI PB] Knob ONCE: Changes from the KEY 1 size to the KEY 2 size, then finishes. GO&REV: Continuously changes back and forth between the KEY 1 size and the KEY 2 size. [. . . ]