User manual YAMAHA VSS-30

[. . . ] IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Failure to follow instructions could void your FCC authorization to use this product in the USA. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. [. . . ] Use the IN and OUT buttons to switch between input level and output level. There are eight meters for Effects processors #1, and two meters for Effects processors #2 through #4. EFFECT TYPE: This is the effects type in the selected memory. Its I/O configuration is shown below this. For details on the Store, Recall, Title Edit, and Clear functions, see "General Library Operation" on page 143. VSS-30 Version 2--Owner's Manual Bus to Stereo Library 147 Bus to Stereo Library Bus to Stereo settings can be stored in the Bus to Stereo library, which contains 1 preset memory and 32 user memories. User memories enable you to store custom settings. See page 97 for information on Bus to Stereo routing. 1 Use the ROUTING [DISPLAY] button to select the Bus to Stereo Library page. When storing, the current Bus Out to Stereo Out settings are stored to the selected memory. CURRENT CONFIGURATION: Bus Out pairing information for the current configuration is displayed here. LIBRARY CONFIGURATION: Bus Out pairing information for the configuration stored in the currently selected memory is displayed here. If the Bus Out pairing configuration does not match the current configuration, the word "CONFLICT" will appear in the LIBRARY CONFIGURATION box. In this case, if you recall such a memory, the VSS-30 will apply the current Bus Out pairing configuration and related parameter settings to the recalled memory settings. See page 111 for information on EQ'ing. 1 Use the EQUALIZER [DISPLAY] button to select the EQ Library page. 2 Use the LAYER buttons to select Layers, and the [SEL] buttons to select channels. When storing, the EQ settings of the currently selected channel, indicated in the upper-left and right corners, are stored to the selected memory. When recalling, the EQ settings in the selected memory are applied to the currently selected channel. CURRENT TYPE: This indicates the current EQ type (TYPE I or TYPE II) for the currently selected channel. CURRENT CURVE: This is the EQ curve of the currently selected channel. Level meters: These meters indicate the levels of the currently selected Input Channel and its horizontal or vertical partner. CURVE: This displays the EQ curve in the currently selected memory. For details on the Store, Recall, Title Edit, and Clear functions, see "General Library Operation" on page 143. VSS-30 Version 2--Owner's Manual Automix Library 151 Automix Library Up to 16 Automixes can be stored in the Automix library. See page 170 for information on using Automix. 1 Use the DISPLAY ACCESS [AUTOMIX] button to select the Automix Memory page. When storing, the current Automix is stored to the selected memory. TITLE: This is the title of the current Automix. CURRENT: This is the size of the current Automix. [. . . ] For MIDI Remote, ALL messages can be transmitted. Mode 2: OMNI ON, MONO Mode 4: OMNI OFF, MONO O: Yes X: No Mode 1: OMNI ON, POLY Mode 3: OMNI OFF, POLY For details of products, please contact your nearest Yamaha representative or the authorized distributor listed below. Pour plus de détails sur les produits, veuillez-vous adresser à Yamaha ou au distributeur le plus proche de vous figurant dans la liste suivante. Die Einzelheiten zu Produkten sind bei Ihrer unten aufgeführten Niederlassung und bei Yamaha Vertragshändlern in den jeweiligen Bestimmungsländern erhältlich. Para detalles sobre productos, contacte su tienda Yamaha más cercana o el distribuidor autorizado que se lista debajo. NORTH AMERICA CANADA Yamaha Canada Music Ltd. [. . . ]