User manual YAMAHA VX-25B

[. . . ] For the safety of everyone in your household, please do not remove product covering. The "exclamation point" calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems. Important safety instructions 1. Read Instructions -- All the safety and operating instructions should be read before the appliance is operated. Retain Instructions -- The safety and operating instructions should be retained for future reference. [. . . ] Select an individual day of the week for recording at weekly intervals on the same day of the week. 9 Use w/v (down/up cursor) to select the Recording mode. The information has been stored in a timer block. 12 Make sure that you inserted a recordable disc. If you inserted a write-protected discs recording will not occur. 13 Turn the Recorder to standby mode by pressing POWER (B/I). 6 Press u (right cursor) to move to Ch. 7 Enter the channel number you want to record with w/ v (down/up cursor) or the digit buttons 0-9. Enter channel numbers as a three digit number. For example, for channel 12, press 0, 1, 2. A cross (X) will appear if invalid information is entered. 8 Press u (right cursor) to move to Start. Memory full All the timer blocks are in use. Solution: Delete one of the Timer recordings. Clock not set-check Clock channel The clock is not set. Set it manually (See `Time/Date Manually') or adjust the Clock channel (See `Time/Date Automatic. ') Data error Solution: Make sure all information is correct and complete. To exit Press TIMER 3 Press u (right cursor). Timer Timer List Date 04 / 07 / 10 / 11 / 20 20 20 20 Ch. 120 089 065 120 Start 09: 00 P M 08: 30 P M 07: 00 A M 09 P M : 00 End 11: 00 P M 09: 30 P M 07: 30 A M 11: 00 P M Rec Mode SP + SP + SP + SP + Total record time 05: 30 To change Press > To exit Press TIMER 4 Select the timer recording you want to check or alter with w/v (down/up cursor). The selected timer recording will be highlighted in blue. 6 Select what you want to check or alter with t/u (left/ right cursor). 7 Alter data with w/v (down/up cursor) or with the digit buttons 0-9. 9 To end, press TIMER, repeatedly if necessary to remove the menus. 10 Turn the Recorder to standby mode by pressing POWER (B/I). 28 RECORDING Clearing a timer block 1 2 3 4 Press TIMER on the remote control. Select `Timer list' with w/v (down/up cursor). [. . . ] 4 Within 30 seconds, enter the correct four digit code by using the digit buttons 0-9. 5 See if the remote works as described at left. If the remote does not work your TV, try other codes for your brand. If the brand of your TV is not in the list, try the codes for other brands one after the other or follow the alternative process as described below. APPENDIX 49 Remote control codes for television Abex. [. . . ]