User manual YAMAHA VX-35

[. . . ] MODEL: Serial No. : The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. 13 14 Read these instructions. Install in accordance with the manufacturer's instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. [. . . ] Each alarm time always appears on the right/left sides of the clock on the front panel display. When the alarm is set to on, the alarm indicator and time light up. You can set the different music to the alarm from what you listen to during the setting. OPERATION Note This operation can be performed only with the buttons on the top of the unit. 2 Set the alarm time. 1 While setting the alarm function, the alarm indicator blinks. 3 The > mark on the right side means that you have other menu items on the following screens. You can go to the next menu item setting by pressing ENTER. 3 Setting the alarm time and sound Note To cancel the alarm function setting during the operations, press SETUP1/SETUP2. The alarm is not set. Select and set TYPE BEEP SOURCE VOLUME. 1 Start setting ALARM1/ALARM2. When you want to set the alarm to ALARM1, set on SETUP1, and SETUP2 is for ALARM2. 1 After setting the alarm time, select the alarm type from BEEP/BEEP+MUSIC/MUSIC. ­ BEEP: beep sound only ­ BEEP+MUSIC: beep sound and music selected in an input source, iPod/FM/CD/USB ­ MUSIC: music only If you set TYPE to BEEP+MUSIC, you can play back the desired music in an input source, iPod/ FM/CD/USB and beep sound together at the time you set. The music volume gradually increases to wake you up comfortably, and then the beep sound plays back at the time you set. English 5 En USING USEFUL FUNCTIONS 2 Select the beep sound. 5 kinds of beep sounds are stored on the unit. The BEEP screen is skipped automatically if you select MUSIC/BEEP+MUSIC in step 1. Even if you delete a song in a playlist, it is not deleted from the library. y For more details on playlists, refer to the instruction manual of your iPod. English 7 En USING USEFUL FUNCTIONS Setting sleeping mode You can set the time to turn off the system automatically. 2 Select the desired dimmer level. Select the sleep time. Press repeatedly. Switching DSP mode When the sleep function is on, the SLEEP indicator lights up. y You can also operate this function with SLEEP on the remote control. You can switch the sound mode according to the environment or your preference. Setting Dimmer mode You can change the brightness of the front panel. If you set DIMMER to AUTO, the dimmer level is adjusted automatically, depending on the brightness of the room. If your room is dark, the front panel becomes darker. Switch DSP mode. Press repeatedly. Each time you press DSP the setting switches as follows: NORMAL: For normal sound MILD: For natural and mild sound y The default setting is AUTO. 1 Select DIMMER from the FUNCTION menu. HEAVY: For more powerful sound (default setting) LIVE: For wide realistic sound Back to NORMAL y After you select DIMMER with Center, < appears on the left side of the front panel display. You can go back to the FUNCTION menu by pressing MENU on the remote control. 8 En BASIC OPERATION :Press one of the Source buttons to select the desired source. *1*2 OPERATION :Press to control the volume. :Press to play/pause. *2 :Press to stop playback. *2 : Press to skip backward/forward. :Press to turn off the sound. Press again to resume the volume. :Press to choose a folder. *3 *1 Even when the system is off, you can start playback of the desired source by pressing one of the Source buttons, without pressing ON/OFF. *2 Playback is resumed from it was last stopped. (Except for CD/USB which are played back from the beginning of the track you listened to last time. ) Only for CD/USB: If you press while the music is stopped, the resume information is cleared and the music starts from the beginning of the first track/file next time. *3 Only for MP3/WMA of CD and USB English 9 En LISTENING TO MUSIC Listening to your iPodTM Notes · The unit is compatible with iPod touch, iPod (Click Wheel including iPod classic), iPod nano and iPod mini. · You can remove your iPod whenever you want. [. . . ] Hold a disc by its edge (and the center hole). · Do not leave a disc in the disc tray when not playing. · Do not use a pencil or pointed marker to write on the disc. · Do not put a tape, seal, glue, etc. , on a disc. [. . . ]