User manual YAMAHA VX-55B

[. . . ] 12 For Canadian customers To prevent electric shock, match wide blade of plug to wide slot and fully insert. This Class B digital apparatus complies with Canadian ICES003. 13 14 15 IMPORTANT! Please record the serial number of this unit in the space below. Model: Serial No. : The serial number is located on the bottom of the unit. Retain this Owner's Manual in a safe place for future reference. [. . . ] · The lamp goes out and the projector goes into a cooling period. In this condition, the POWER indicator turns red and the STATUS indicator blinks green. Wait about one minute for the STATUS indicator to be off and the POWER indicator to be steadily lit in red. · During this one minute period, the intake fan and exhaust fan rotate to cool the lamp. · Do not unplug the power cable while the STATUS indicator is blinking. Unplugging the power cable immediately after use may cause a breakdown. · The fan may make loud sounds during cooling; this is not a malfunction. STANDBY( )button STANDBY/ON button 18 7 Menu Menu overview Menus are not displayed when no signal is received by the projector. IMAGE CONTRAST BRIGHTNESS WHITE ENHANCE *1 sRGB COLOR TEMP. *1 0 - 60 ± 30 DEFAULT, 0 - 10 ON , OFF CONTRAST R HIGH CONTRAST B MID BRIGHTNESS R LOW BRIGHTNESS B CUSTOM 0 - 20 ± 10 0 - 10 DEFAULT, DYNAMIC, CINEMA1, CINEMA2 0 - 60 0 - 60 ± 30 ± 30 SATURATION *1 *3 *1 *3 HUE *3 SHARPNESS *1 GAMMA SET UP KEYSTONE AUTO POWER ON AUTO POWER OFF SPLASH SCREEN HIDE SCREEN COLOR LAMP MODE LOCATION ± 20 ON , OFF OFF, 5, 10, 15, 30, 60 min ON , OFF BLUE, BLACK BRIGHT, CINEMA FRONT/TABLE, REAR/TABLE, REAR/CEILING, FRONT/CEILING INITIAL MENU POSITION PROGRESSIVE MODE *3 COLOR SYSTEM *3 ASPECT UPPER LEFT, LOWER RIGHT AUTO , VIDEO AUTO , NTSC , PAL , SECAM , 4. 43NTSC , PAL-M , PAL-N , PAL-60 DEFAULT, NORMAL, SQUEEZE, ZOOM, THROUGH *2 LANGUAGE RESET ALL , ENGLISH, ESPANÕL, DEUTSCH, FRANÇAIS, ITALIANO, EXECUTE SIGNAL HORIZ. POSITION*3 VERT. POSITION *3 *3 PHASE *3 TRACKING *3 D-SUB INPUT *3 SET UP LEVEL SYNC NOISE MASK *3 0 - 999 *2 0 - 999 *2 0 - 31 0 - 9999 *2 RGB, COMPONENT OFF, 3. 5%, 7. 5% ON OFF BEGIN END CLAMP POSITION CLAMP WIDTH LPF *3 0 - 99 0 - 99 0 - 63 1 - 63 ON , OFF A/D SETTING *3 EXECUTE *2 *2 After selecting the items marked with , press the ENTER button. *1: Not available when sRGB is set to ON. *2: Setting range differs depending on the input signals. *3: Refer to the chart below for availability / unavailability. SATURATION HUE SHARPNESS PROGRESSIVE MODE COLOR SYSTEM HORIZ. POSITION PHASE TRACKING D-SUB INPUT SET UP LEVEL SYNC NOISE MASK A/D SETTING LPF Unavailable when the input source is DVI or the D-SUB source is an RGB signal. POSITON PHASE TRACKING D-SUB INPUT SET UP LEVEL SYNC NOISE MASK A/D SETTING 78 22 0 0 RGB 7. 5% OFF EXECUTE 1. IMAGE menu ITEM CONTRAST BRIGHTNESS WHITE ENHANCE SETTING 0 ­ 60 ±30 DEFAULT 0 ­ 10 sRGB COLOR TEMP. ON / OFF HIGH MID LOW CUSTOM SATURATION HUE SHARPNESS GAMMA 0 ­ 20 ±10 0 ­ 10 DEFAULT DYNAMIC CINEMA1 CINEMA2 FUNCTION Use to adjust the contrast of the projected image (see page 24). Use to adjust the brightness of the projected image (see page 24). The appropriate white enhance value is automatically selected depending on the input signal. Use to adjust the white level of the projected image (see page 24). Select whether or not to project emphasizing on the color reproducibility. Select for a high color temperature (see page 25). Select for a balanced color temperature (see page 25) Select for a low color temperature (see page 25) Use to customize the color temperature (see page 25) Use to adjust the color richness of the projected image (see page 24). Use to adjust the color tint of the projected image (see page 24). Use to adjust the sharpness of the projected image (see page 24). [. . . ] (Total lamp operation time reached 4000 hours*1, *2 while the power was off. ) The lamp cover isn't closed. Steady red Blinking red Steady red Steady red Close the cover correctly. Blinking green/red Off Abnormal. Blinking green/red Steady or Blinking Contact your dealer. *1: When LAMP MODE of the SETUP menu is set to CINEMA. When it is set to BRIGHT, this duration will be decreased. *2: When LAMP MODE is set to BRIGHT, this duration will be decreased to 2000 hours. 34 16 Specifications Projector specifications The specifications and outside appearance of the projector are subject to change without prior notice. Type Model Display Technology Projection lens Light-source lamp Image size (Projection distance) Maximum number of display colors Maximum resolution Computer signal Video signal Component signal Input terminal DLPTM projector VX-55B 0. 65-inch Single chip DMD (Aspect ratio 16:9) Pixel 1024 × 576 = 589824 pixels F 2. 4 ­ 2. 6 f= 23 ­ 27. 6 mm 250 W 40" min. [. . . ]