User manual YAMAHA VXS8-VA VXS8-VAW VXS5-VA VXS5-VAW

[. . . ] - Choose mounting hardware and an installation location that can support the weight of the device. - Avoid locations that are exposed to constant vibration. - Use the required tools to install the device. - Inspect the device periodically. ● Handling and maintenance • Do not expose the device to excessive dust or vibration, or extreme cold or heat (such as in direct sunlight, near a heater, or in a car during the day), in order to prevent the possibility of panel disfiguration, unstable operation, or damage to the internal components. [. . . ] By disposing of these products correctly, you will help to save valuable resources and prevent any potential negative effects on human health and the environment which could otherwise arise from inappropriate waste handling. For more information about collection and recycling of old products, please contact your local municipality, your waste disposal service or the point of sale where you purchased the items. [For business users in the European Union] If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information. [Information on Disposal in other Countries outside the European Union] This symbol is only valid in the European Union. If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Handling caution • Do not insert your fingers or hands in any gaps or openings on the device (ports). • Do not rest your weight on the device or place heavy objects on it. • Do not operate the device if the sound is distorting. Prolonged use in this condition could cause overheating and result in fire. • Do not pull the cables connected. • When choosing a power amplifier for use with this device, make sure that the output power of the amplifier is lower than the power capacity of this device (see “Specifications”). Even if the output power of the amplifier is lower than the power capacity of this device (program), use of excessive input signals resulting in clipping may cause damage to the device. Malfunction or fire may occur especially when the following sounds or noises are generated: - feedback, when using a microphone - continuous and extreme volume sound from a musical instrument - extreme continuous distorted sound - noise caused by plugging/unplugging the cable while the amplifier is turned on Yamaha cannot be held responsible for damage caused by improper use or modifications to the device. The specifications data was measured in an anechoic chamber, according to EN 54-24. Reference axis: Axis is on the center of grille surface and perpendicular to the grille surface. Reference plane: Plane is on the grille surface and perpendicular to the reference axis. Horizontal plane: Plane is containing the reference axis and perpendicular to the reference plane. *1: Full-space (4π) *2: Calculated based on power rating and sensitivity, exclusive of power compression. *4: IP34 when installing the speaker on the ceiling vertically. *5: Excluding installation with the grille facing up. The contents of this manual apply to the latest specifications as of the printing date. Since Yamaha makes continuous improvements to the product, this manual may not apply to the specifications of your particular product. To obtain the latest manual, access the Yamaha website then download the manual file. Since specifications, equipment or separately sold accessories may not be the same in every locale, please check with your Yamaha dealer. [. . . ] The 8Ω position should be selected for 8Ω audio systems only. If the setting is incorrect, it may cause malfunction of the speaker and amplifier. • Make sure the amplifier is switched off before operating the tap selector switch. The installation is complete. Note Use a flat-blade screwdriver with a blade less than 3 mm (0. 1 in. ). Less than 3 mm (0. 1 in. ) 3 Attach the Mounting Bracket and Safety Wire 3. 1 Attach the mounting bracket and safety wire to the speaker. [. . . ]