User manual YAMAHA WF115

[. . . ] If these corrective measures do not produce satisfactory results, please contact the local retailer authorized to distribute this type of product. If you can not locate the appropriate retailer, please contact Yamaha Corporation of America, Electronic Service Division, 6600 Orangethorpe Ave, Buena Park, CA90620 The above statements apply ONLY to those products distributed by Yamaha Corporation of America or its subsidiaries. * This applies only to products distributed by YAMAHA CORPORATION OF AMERICA. CANADA This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. · This applies only to products distributed by Yamaha Canada Music Ltd. · Ceci ne s'applique qu'aux produits distribués par Yamaha Canada Musique Ltée. Precautions q Do not expose the soundcard to direct sunlight, excessive humidity, high temperatures, excessive dust or strong vibrations. [. . . ] Put down the number on a piece of paper to make online registration of the card. Because it might be difficult to check the number after installation of the card inside the computer, this must be done BEFORE attaching the card inside of your computer. Installation of the PCI Card: For detailed procedure to install the card and its driver software, refer to the description you printed out from Acrobat Reader. Notice that installation of the card requires an empty PCI card slot in your computer. If you use a PCI slot that has been occupied with another card, first remove the driver software for that card, turn off the computer to remove the card, and then reboot the computer to forcibly recognize that the old card is not there. Installation of the Driver Software: The soundcard will not work until you install appropriate driver software (Yamaha DS-XG driver) and reboot the computer. Follow the instructions below to install the appropriate DS-XG driver. n Different driver software should be installed to a different version of Windows 95. Say, Windows 95 OEM System Release 2 (aka. , OSR2) requires driver software other than for pre-OSR2 version of Windows 95. 3 Installing the DS-XG Driver Software for Windows 95 (4. 00. 950 or 4. 00. 950a) The WAVEFORCE soundcard is a Windows 95 Plug-and-Play device. Once the soundcard is installed and your computer is rebooted, Windows 95 will automatically detect the device and start the Install Wizard. The New Hardware Found window will appear. 1 Insert the WF192XG Installation Wizard CD-ROM in your CD drive, select "Driver from disk provided by hardware manufacture" and click the [OK] button to continue. 2 Windows95 asks you to insert a floppy disk. But the drivers are supplied by CD-ROM, click the [Browse] button. 3 Select CD-ROM drive and the folder "drivers\win95\English". This completes the installation process of the DS-XG Device Manager. Consecutively, install the device drivers for PCI Audio Codec, Legacy Sound System and Legacy Game Port. 4 Installing the Device Drivers for PCI Audio Codec, Legacy Sound System and Legacy Game Port 1 Once the DS-XG Device Manager installation is complete, the Update Device Driver Wizard window will appear. Insert the WF192XG Installation Wizard CD-ROM in your CD drive and click the [Next] button to continue. 2 The information displayed in the Updated Device Driver Wizard window will now change. Verify that "YAMAHA DS-XG PCI Audio CODEC" is displayed and click the [Finish] button. 3 If you have never installed the joystick driver, the Insert Disk window appears. Insert Windows95 CD-ROM or disk, click the [OK] button and install the joystick driver. This completes all the installation procedures. Installing the DS-XG Driver Software for Windows 98 ver. 1. 0 The WAVEFORCE soundcard is a Windows 98 Plug-and-Play device. Once the soundcard is installed and your computer is rebooted, Windows 98 will automatically detect the device and start the Install Wizard. The Add New Hardware Wizard window will appear. 1 Insert the WF192XG Installation Wizard CD-ROM in your CD drive and click the [Next] button to continue. [. . . ] Double-click the "Multimedia" icon. 5 The Multimedia Properties window now appears. Verify that your computer does not contain any existing DS-XG audio devices and then click the [Add] button. n Verify if DS-XG audio devices exist by double-clicking the "Audio Devices" icon. If any drivers are listed, you will need to uninstall the device by selecting it and then clicking the [Remove] button. [. . . ]