User manual YAMAHA WOODEN RECORDER BASS

[. . . ] 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] Increase this figure to render a sharper image, or reduce it to give a softer image with less image noise. You cannot adjust this parameter if [Sharpness Type] is set to [Off]. Choices: 0 to 10 26 Menu items Color Adjustment (Input signal) Video/S-Video/Component/ RGB TV/RGB PC Adjusts color balance. There are three menus available, [Standard], [WRGB], and [WRGBYCM], separated in order of complexity from simple to detailed. Refer to page 36 for parameter operation methods. The present color temperature setting is displayed to the right of the menu items. + Color Adjustment Standard 6700K -0. 000uv The current color temperature is displayed. - Standard Adjusts color temperature and hUV only. hUV adjusts values within the maximum color temperature limits of the projector. y 0. 5 W (Color temperature and h UV) 0. 0 0. 0 0. 5 x - WRGB Adjusts the color coordinates and gain for the three primary colors, R(Red), G(Green), and B(Blue). The unit sets the complemental colorsY(Yellow), C(Cyan), and M(Magenta) automatically. Adjusting [Color Temp. ] resets the RGB gain based on color coordinate settings. Changes from Interlace/Progressive (I/P) conversion mode to [Auto] or [Video] mode. · [Auto] : Detects the film source automatically and projects it progressively. · [Video] : Turns the detection function off. · [Auto] : Selects the best color space coefficient for the image resolution. · [SDTV] : Color space coefficient for BT. 601 type signal. · [HDTV] : Color space coefficient for BT. 709 type signal. Compensates for differences in the black levels of SDTV images. · For signals equal to the pedestal level : Set to [0%]. · For signals with high levels of blackness : Set to [7. 5%]. % 100 3D Y/C Separation (Input signal) Video(NTSC) Noise Reduction (Input signal) Video/S-Video/Component/RGB TV Video Type (Input signal) Video/S-Video Progressive Mode (Input signal) Video/S-Video/Component/RGB TV Color Space Conversion (Input signal) Video/S-Video/Component Setup Level (SDTV) (Input signal) Video/S-Video/Component/RGB TV 0 PEDESTAL LEVEL BLACK LEVEL 28 Menu items Setup Level (HDTV) (Input signal) Component/RGB TV Compensates for differences in the black levels of HDTV images. · For signals equal to the pedestal level : Set to [0%]. · For signals with high levels of blackness : Set to [7. 5%]. % 100 0 PEDESTAL LEVEL BLACK LEVEL Sync Adjustment (Input signal) RGB PC (except for HDMI signals) Regulates flickering, noise, and disorder in the image. [. . . ] Memory 1--6 Now Processing The lamps has reached its recommended replacement time. Invalid Operation Condition The unit is not receiving or detecting any signal at the selected input jack. This message is displayed together with the name of the input source selected with the INPUT button. The input name selected by the INPUT button is displayed. [. . . ]