User manual YAMAHA WOODEN RECORDER TENOR

[. . . ] 8 Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9 Do not defeat the safety purpose of the polarized or groundingtype plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. [. . . ] By the default setting, the WOODEN RECORDER TENOR automatically selects BT709 (RGB color coordinate for High-Definition Television) for HDTV (HighDefinition Television) or PC video input and BT601 (RGB color coordinate for Standard Television) for SDTV (Standard Television) input. Refer to page 36 for parameter operation methods. The present color temperature setting is displayed to the right of the menu items. + Color Adjustment Standard 6700K -0. 000uv The current color temperature is displayed. - Standard Adjusts color temperature and hUV only. hUV adjusts values within the maximum color temperature limits of the projector. y 0. 5 W (Color temperature and h UV) 0. 0 0. 0 0. 5 x - WRGB Adjusts the color coordinates and gain for the three primary colors, R(Red), G(Green), and B(Blue). The unit sets the complemental colors Y(Yellow), C(Cyan), and M(Magenta) automatically. Adjusting [Color Temp. ] resets the RGB gain based on color coordinate settings. Adjusting [Gain] resets [Color temp. ] based on color coordinate settings. - WRGBYCM Adjusts the color coordinates and gain for each component color individually. Press the RESET button on the remote control when the WRGBYCM menu is open to automatically adjust the RGB gain and YCM color coordinates and gain based on the color temperature and RGB color settings. · [HDTV] : Color space coefficient for BT. 709 type signal. Compensates for differences in the black levels of SDTV images. · For signals equal to the pedestal level : Set to [0%]. · For signals with high levels of blackness : Set to [7. 5%]. % 100 3D Y/C Separation (Input signal) Video(NTSC) Noise Reduction (Input signal) Video/S-Video/Component/RGB TV Video Type (Input signal) Video/S-Video Progressive Mode (Input signal) Video/S-Video/Component/RGB TV Color Space Conversion (Input signal) Video/S-Video/Component Setup Level (SDTV) (Input signal) Video/S-Video/Component/RGB TV 0 PEDESTAL LEVEL BLACK LEVEL 28 Menu items Setup Level (HDTV) (Input signal) Component/RGB TV Compensates for differences in the black levels of HDTV images. · For signals equal to the pedestal level : Set to [0%]. · For signals with high levels of blackness : Set to [7. 5%]. % 100 0 PEDESTAL LEVEL BLACK LEVEL Sync Adjustment (Input signal) RGB PC (except for HDMI signals) Regulates flickering, noise, and disorder in the image. Choices: -128 to +127 Tracking (Input signal) RGB PC (except for HDMI signals) Regulates vertical striping in the image. Choices: 0 to 31 Clamp Position (Input signal) Component/RGB TV Adjusts the clamp position for analog video sources. Display Position (Input signal) RGB PC (except for HDMI signals)/ Component/RGB TV Adjusts the horizontal display position of the image. Choices: PC type : -50 to 0 to +50 Video type : -10 to 0 to +10 7 Menu Vert. Display Position (Input signal) RGB PC (except for HDMI signals)/ Component/RGB TV Adjusts the vertical display position of the image. [. . . ] These are characteristics of DMDTM , not mechanical problems. 11 Reference 59 Message display Message No Signal INPUT A (Component) (Example) Out Of Range Unknown Format Auto Sync. . . Memory 1--6 Now Processing The lamps has reached its recommended replacement time. Invalid Operation Condition The unit is not receiving or detecting any signal at the selected input jack. This message is displayed together with the name of the input source selected with the INPUT button. [. . . ]