User manual YAMAHA XVS650A-2000

[. . . ] OWNER'S MANUAL XVS650 XVS650A 4VR-28199-E3 INTRODUCTION 40 EAU00001 Welcome to the Yamaha world of motorcycling!As the owner of a XVS650/XVS650A, you are benefiting from Yamaha's vast experience in and newest technology for the design and the manufacture of high-quality products, which have earned Yamaha a reputation for dependability. Please take the time to read this manual thoroughly, so as to enjoy all your XVS650/XVS650A's advantages. The owner's manual does not only instruct you in how to operate, inspect and maintain your motorcycle, but also in how to safeguard yourself and others from trouble and injury. [. . . ] Reinstall the drain bolt and tighten it to the specified torque. Tightening torque: Drain bolt: 43 Nm (4. 3 m·kg) 7. Install a new oil filter and O-ring. 8. Install oil filter cover and cover, then tighten the bolts. Install the oil filler cap and tighten it. Oil quantity: Total amount: 3. 2 L Periodic oil change: 2. 6 L With oil filter replacement: 2. 8 L 6-10 PERIODIC MAINTENANCE AND MINOR REPAIR 2. Remove the oil filler bolt and check the oil level. The oil level should be at the brim of the filler hole. Place an oil pan under the final gear case. Remove the oil filler bolt and drain bolt to drain the oil. Install and tighten the drain bolt to the specified torque. Tightening torque: Drain bolt: 23 Nm (2. 3 m·kg) 4. Fill the gear case to the brim of the filler hole with the recommended oil. 1 2 3 4 5 6 7 q 1. Proper level EAU02943* CAUTION: q Final gear oil EW000066 8 9 Do not put in any chemical additives. Engine oil also lubricates the clutch and additives could cause clutch slippage. Be sure no foreign material enters the crankcase. WARNING Do not let foreign material enter the final gear case. Be sure oil does not get on the tire or wheel. 10. Start the engine and warm it up for a few minutes. While warming up, check for oil leakage. If oil leakage is found, stop the engine immediately and check for the cause. Oil level inspection 1. Place the motorcycle on a level place and hold it in an upright position. The engine should be cool at ambient temperature. 6-11 PERIODIC MAINTENANCE AND MINOR REPAIR Final gear oil quantity: 0. 19 L Recommended oil: SAE 80 API GL-4 Hypoid gear oil If desired, an SAE 80W90 hypoid gear oil may be used for all conditions. [. . . ] 6-15 Tool kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-1 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-34 Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-35 Turn indicator light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]